# This is the config file for Yanic written in "Tom's Obvious, Minimal Language." # syntax: https://github.com/toml-lang/toml # (if you need something multiple times, checkout out the [[array of table]] section) # Send respondd request to update information [respondd] enable = true # Delay startup until a multiple of the period since zero time synchronize = "1m" # how often request per multicast collect_interval = "1m" # table of a site to save stats for (not exists for global only) #[respondd.sites.example] ## list of domains on this site to save stats for (empty for global only) #domains = [] ## example [respondd.sites.ffhb] domains = ["city"] # interface that has an IP in your mesh network [[respondd.interfaces]] # name of interface on which this collector is running ifname = "br-ffhb" # ip address which is used for sending # (optional - without definition used a address of ifname) ip_address = "fd2f:5119:f2d::5" # disable sending multicast respondd request # (for receiving only respondd packages e.g. database respondd) #send_no_request = false # multicast address to destination of respondd # (optional - without definition used batman default ff02::2:1001) multicast_address = "ff05::2:1001" # define a port to listen # if not set or set to 0 the kernel will use a random free port at its own #port = 10001 # A little build-in webserver, which statically serves a directory. # This is useful for testing purposes or for a little standalone installation. [webserver] enable = false bind = "127.0.0.1:8080" webroot = "/var/www/html/meshviewer" [nodes] # Cache file # a json file to cache all data collected directly from respondd state_path = "/var/lib/yanic/state.json" # prune data in RAM, cache-file and output json files (i.e. nodes.json) # that were inactive for longer than prune_after = "7d" # Export nodes and graph periodically save_interval = "5s" # Set node to offline if not seen within this period offline_after = "10m" ## [[nodes.output.example]] # Each output format has its own config block and needs to be enabled by adding: #enable = true # # For each output format there can be set different filters #[nodes.output.example.filter] # # WARNING: if it is not set, it will publish contact information of other persons # Set to true, if you did not want the json files to contain the owner information #no_owner = true # # List of nodeids of nodes that should be filtered out, so they won't appear in output #blacklist = ["00112233445566", "1337f0badead"] # # List of site_codes of nodes that should be included in the output #sites = ["ffhb"] # # replace the site_code with the domain_code in this output # e.g. site_code='ffhb',domain_code='city' => site_code='city', domain_code='' #domain_as_site = true # # append on the site_code the domain_code with a '.' in this output # e.g. site_code='ffhb',domain_code='city' => site_code='ffhb.city', domain_code='' #domain_append_site = true # # set has_location to true if you want to include only nodes that have geo-coordinates set # (setting this to false has no sensible effect, unless you'd want to hide nodes that have coordinates) #has_location = true #[nodes.output.example.filter.in_area] # nodes outside this area are not shown on the map but are still listed as a node without coordinates #latitude_min = 34.30 #latitude_max = 71.85 #longitude_min = -24.96 #longitude_max = 39.72 # definition for the new more compressed meshviewer.json [[nodes.output.meshviewer-ffrgb]] enable = true path = "/var/www/html/meshviewer/data/meshviewer.json" [nodes.output.meshviewer-ffrgb.filter] # WARNING: if it is not set, it will publish contact information of other persons no_owner = false #blacklist = ["00112233445566", "1337f0badead"] #sites = ["ffhb"] #has_location = true #[nodes.output.meshviewer-ffrgb.filter.in_area] #latitude_min = 34.30 #latitude_max = 71.85 #longitude_min = -24.96 #longitude_max = 39.72 # definition for nodes.json [[nodes.output.meshviewer]] enable = false # The structure version of the output which should be generated (i.e. nodes.json) # version 1 is accepted by the legacy meshviewer (which is the master branch) # i.e. https://github.com/ffnord/meshviewer/tree/master # version 2 is accepted by the new versions of meshviewer (which are in the legacy develop branch or newer) # i.e. https://github.com/ffnord/meshviewer/tree/dev # https://github.com/ffrgb/meshviewer/tree/develop version = 2 # path where to store nodes.json nodes_path = "/var/www/html/meshviewer/data/nodes.json" # path where to store graph.json graph_path = "/var/www/html/meshviewer/data/graph.json" [nodes.output.meshviewer.filter] # WARNING: if it is not set, it will publish contact information of other persons no_owner = true # definition for nodelist.json [[nodes.output.nodelist]] enable = true path = "/var/www/html/meshviewer/data/nodelist.json" [nodes.output.nodelist.filter] # WARNING: if it is not set, it will publish contact information of other persons no_owner = true [database] # this will send delete commands to the database to prune data # which is older than: delete_after = "7d" # how often run the cleaning delete_interval = "1h" ## [[database.connection.example]] # Each database-connection has its own config block and needs to be enabled by adding: #enable = true # Save collected data to InfluxDB. # There are the following measurments: # node: store node specific data i.e. clients memory, airtime # global: store global data, i.e. count of clients and nodes # firmware: store the count of nodes tagged with firmware # model: store the count of nodes tagged with hardware model [[database.connection.influxdb]] enable = false address = "http://localhost:8086" database = "ffhb" username = "" password = "" # Tagging of the data (optional) [database.connection.influxdb.tags] # Tags used by Yanic would override the tags from this config # nodeid, hostname, owner, model, firmware_base, firmware_release,frequency11g and frequency11a are tags which are already used #tagname1 = "tagvalue 1" # some useful e.g.: #system = "productive" #site = "ffhb" # Graphite settings [[database.connection.graphite]] enable = false address = "localhost:2003" # Graphite is replacing every "." in the metric name with a slash "/" and uses # that for the file system hierarchy it generates. it is recommended to at least # move the metrics out of the root namespace (that would be the empty prefix). # If you only intend to run one community and only freifunk on your graphite node # then the prefix can be set to anything (including the empty string) since you # probably wont care much about "polluting" the namespace. prefix = "freifunk" # respondd (yanic) # forward collected respondd package to a address # (e.g. to another respondd collector like a central yanic instance or hopglass) [[database.connection.respondd]] enable = false # type of network to create a connection type = "udp6" # destination address to connect/send respondd package address = "stats.bremen.freifunk.net:11001" # Logging [[database.connection.logging]] enable = false path = "/var/log/yanic.log"