fhansch
/
procedure
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

changes from first procedure run

This commit is contained in:
Finn 2020-06-17 18:29:07 +02:00
parent 2915375704
commit 123bd2cfaf
3 changed files with 68 additions and 68 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
AbortProcedure.csv
View File

@ -1,4 +1,4 @@
vers.;v4.31;Abort Procedure;;3;mrl;mcc;rdh;time vers.;v4.32;Abort Procedure;;3;mrl;mcc;rdh;time
0:00;MCC;BEGIN SEQUENCE: Prepare Launch Abort;Prepare Launch Abort;3;;;; 0:00;MCC;BEGIN SEQUENCE: Prepare Launch Abort;Prepare Launch Abort;3;;;;
0:00;MCC;Inform OPS of Launch Abort;;3;;;; 0:00;MCC;Inform OPS of Launch Abort;;3;;;;
0:00;EGSE;Confirm all valve switches are in OFF position (Except OxDV & HPDV);;3;;;; 0:00;EGSE;Confirm all valve switches are in OFF position (Except OxDV & HPDV);;3;;;;
@ -22,8 +22,6 @@ vers.;v4.31;Abort Procedure;;3;mrl;mcc;rdh;time
0:00;EGSE;Turn ON EPS_BAT (Rocket OFF);;2;;;; 0:00;EGSE;Turn ON EPS_BAT (Rocket OFF);;2;;;;
0:00;MCC;Announce BEGIN of Radio Silence;;3;;;; 0:00;MCC;Announce BEGIN of Radio Silence;;3;;;;
0:00;MRL;Go to MRL, THEN...;;2;;;; 0:00;MRL;Go to MRL, THEN...;;2;;;;
0:00;MRL;Remove HP section maintenance cover, THEN...;;2;;;;
0:00;MRL;Open RMDV & Step Back, Wait until NCE-Tank is pressureless, THEN...;;2;;;;
0:00;MRL;Close N2O Bottle 1 & N2O Bottle 2, THEN...;;2;;;; 0:00;MRL;Close N2O Bottle 1 & N2O Bottle 2, THEN...;;2;;;;
0:00;MRL;RETURN to Block House;;2;;;; 0:00;MRL;RETURN to Block House;;2;;;;
0:00;EGSE;Open OxDV;;2;;;; 0:00;EGSE;Open OxDV;;2;;;;
@ -43,7 +41,10 @@ vers.;v4.31;Abort Procedure;;3;mrl;mcc;rdh;time
0:00;EGSE;Confirm pressure HPLPT & HPPT2 0 Bar;;2;;;; 0:00;EGSE;Confirm pressure HPLPT & HPPT2 0 Bar;;2;;;;
0:00;EGSE;Close HPV2;;2;;;; 0:00;EGSE;Close HPV2;;2;;;;
0:00;EGSE;Close HPDV;;2;;;; 0:00;EGSE;Close HPDV;;2;;;;
0:00;MCC;Lower MRL to 0 degrees;;2;;;;05:00
0:00;MRL;Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN...;;2;;;; 0:00;MRL;Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN...;;2;;;;
0:00;MRL;Remove HP section maintenance cover, THEN...;;2;;;;
0:00;MRL;Open RMDV & Step Back, Wait until NCE-Tank is pressureless, THEN...;;2;;;;
0:00;MRL;Close He Bottle 1, THEN ...;;2;;;; 0:00;MRL;Close He Bottle 1, THEN ...;;2;;;;
0:00;MRL;Open ComTerm;;2;;;; 0:00;MRL;Open ComTerm;;2;;;;
8:15;MCC;Turn ON ComTerm step delay;;2;;;; 8:15;MCC;Turn ON ComTerm step delay;;2;;;;

1 vers. v4.31 v4.32 Abort Procedure 3 mrl mcc rdh time
2 0:00 MCC BEGIN SEQUENCE: Prepare Launch Abort Prepare Launch Abort 3
3 0:00 MCC Inform OPS of Launch Abort 3
4 0:00 EGSE Confirm all valve switches are in OFF position (Except OxDV & HPDV) 3
22 0:00 EGSE Turn ON EPS_BAT (Rocket OFF) 2
23 0:00 MCC Announce BEGIN of Radio Silence 3
24 0:00 MRL Go to MRL, THEN... 2
0:00 MRL Remove HP section maintenance cover, THEN... 2
0:00 MRL Open RMDV & Step Back, Wait until NCE-Tank is pressureless, THEN... 2
25 0:00 MRL Close N2O Bottle 1 & N2O Bottle 2, THEN... 2
26 0:00 MRL RETURN to Block House 2
27 0:00 EGSE Open OxDV 2
41 0:00 EGSE Confirm pressure HPLPT & HPPT2 0 Bar 2
42 0:00 EGSE Close HPV2 2
43 0:00 EGSE Close HPDV 2
44 0:00 MCC Lower MRL to 0 degrees 2 05:00
45 0:00 MRL Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN... 2
46 0:00 MRL Remove HP section maintenance cover, THEN... 2
47 0:00 MRL Open RMDV & Step Back, Wait until NCE-Tank is pressureless, THEN... 2
48 0:00 MRL Close He Bottle 1, THEN ... 2
49 0:00 MRL Open ComTerm 2
50 8:15 MCC Turn ON ComTerm step delay 2

127
LaunchProcedure.csv
View File

@ -1,4 +1,4 @@
vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step vers.;v4.32;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
147:20;MCC;BEGIN SEQUENCE: Power on EGSE;Power on EGSE;1;;;; 147:20;MCC;BEGIN SEQUENCE: Power on EGSE;Power on EGSE;1;;;;
147:20;WIND;Start wind weighting analysis;;1;;;; 147:20;WIND;Start wind weighting analysis;;1;;;;
147:20;EGSE;Check CLD connection;;1;;;; 147:20;EGSE;Check CLD connection;;1;;;;
@ -13,8 +13,8 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
146:20;EGSE @MRL;Switch ON Sup_24V_40A;;1;;;; 146:20;EGSE @MRL;Switch ON Sup_24V_40A;;1;;;;
146:20;EGSE @MRL;Switch ON Sup_5V_10A;;1;;;;03:00 146:20;EGSE @MRL;Switch ON Sup_5V_10A;;1;;;;03:00
143:20;EGSE;Connect to cRio;;1;;;; 143:20;EGSE;Connect to cRio;;1;;;;
130:40;EGSE;Confirm storage capacity of cRio is greater than 300MB;;1;;;;00:10
143:20;EGSE;Start RT_VI;;1;;;; 143:20;EGSE;Start RT_VI;;1;;;;
130:40;EGSE;Confirm storage capacity of cRio is greater than 300MB;;1;;;;00:10
143:20;EGSE;Open PID-VI and confirm it is running;;1;;;; 143:20;EGSE;Open PID-VI and confirm it is running;;1;;;;
143:20;EGSE;Rename PID-Logfile;;1;;;;02:00 143:20;EGSE;Rename PID-Logfile;;1;;;;02:00
141:20;MCC;BEGIN SEQUENCE: Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30 141:20;MCC;BEGIN SEQUENCE: Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30
@ -34,26 +34,27 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
0:00;EGSE @MRL;Insert MAIN_BUS Bridge (2L);;1;;;; 0:00;EGSE @MRL;Insert MAIN_BUS Bridge (2L);;1;;;;
0:00;EGSE @MRL;Confirm MAIN_BUS LED is OFF (if ON pull MAIN_BUS Bridge (2L) & Insert all grounding Bridges on the right side;;1;;;; 0:00;EGSE @MRL;Confirm MAIN_BUS LED is OFF (if ON pull MAIN_BUS Bridge (2L) & Insert all grounding Bridges on the right side;;1;;;;
0:00;EGSE @MRL;Remove EPS RADIO SILENCE Bridge (3R);;1;;;; 0:00;EGSE @MRL;Remove EPS RADIO SILENCE Bridge (3R);;1;;;;
0:00;EGSE;Turn OFF EGSE EPS_BAT;;1;;;; 0:00;EGSE;Turn OFF EPS_BAT;;1;;;;
0:00;EGSE @MRL;Confirm MAIN_BUS LED is ON;;1;;;; 0:00;EGSE @MRL;Confirm MAIN_BUS LED is ON;;1;;;;
0:00;EGSE @MRL;Confirm 1 beep at Telemega;;1;;;; 0:00;EGSE @MRL;Confirm 1 beep at Telemega;;1;;;;
140:50;OBDH;Start OBC1;;1;;;;01:00
139:50;MRL;Confirm 3 beeps at OBC1;;1;;;;
140:50;OBDH;Clear SD-Card-using FileZilla FTP;;1;;;;01:00 140:50;OBDH;Clear SD-Card-using FileZilla FTP;;1;;;;01:00
139:50;OBDH;Connect to sbRio using remote Access utility;;1;;;; 139:50;OBDH;Connect to sbRio using remote Access utility;;1;;;;
139:50;MRL;Confirm 3 beeps at OBC1;;1;;;;
139:50;OBDH;Open RT_Sub_HMI;;1;;;; 139:50;OBDH;Open RT_Sub_HMI;;1;;;;
139:50;OBDH;Confirm Main Chute button is disabled;;1;;;; 139:50;OBDH;Confirm Main Chute button is disabled;;1;;;;
135:40;OBDH;Check EPS hardware Voltages;;1;;;;00:10 135:40;OBDH;Check EPS hardware Voltages;;1;;;;00:10
0:00;EGSE;Check EGSE Currents;;1;;;;00:10 0:00;EGSE;Check EGSE Currents;;1;;;;00:10
139:50;WIND;Report on weather situation;;1;;;; 139:50;WIND;Report on weather situation;;1;;;;
139:50;MCC;BEGIN SEQUENCE: Connect Fueling arm;Connect Fueling Arm;1;;;; 139:50;MCC;BEGIN SEQUENCE: Connect Fueling arm @HPSM;Connect Fueling Arm;1;;;;
139:50;MRL;Confirm working personel is grounded;;1;;;;01:00 139:50;MRL;Confirm working personel is grounded;;1;;;;01:00
139:50;MRL;Confirm PPG 0 bar;;1;;;; 139:50;MRL;Confirm PPG 0 bar;;1;;;;
138:50;MRL;Remove Pneumatic Line from Fueling arm;;1;;;; 138:50;MRL;Remove Pneumatic Line from Fueling arm;;1;;;;
138:50;MRL;Move Fueling arm to rocket;;1;;;; 138:50;MRL;Move Fueling arm to rocket;;1;;;;
138:50;MRL;Couple Helium coupling;;1;;;; 138:50;MRL;Couple Helium coupling;;1;;;;
138:50;MRL;Couple N2O coupling;;1;;;; 138:50;MRL;Couple N2O coupling;;1;;;;
138:50;MRL;Reattach Pneumatic Line to Fueling arm;;1;;;;03:00 138:50;MRL;Reattach Pneumatic Line to Fueling arm @HPSM;;1;;;;03:00
135:50;EGSE;BEGIN SEQUENCE: EGSE sensor and actuator test;EGSE sensor & actuator test;1;;;; 135:50;MCC;BEGIN SEQUENCE: EGSE sensor and actuator test;EGSE sensor & actuator test;1;;;;
135:50;MCC;Confirm that video recording is enabled @ MCC;;1;;;;00:10 135:50;MCC;Confirm that video recording is enabled @ MCC;;1;;;;00:10
135:50;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;; 135:50;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;;
135:30;EGSE;Start PID data recording;;1;;;;00:10 135:30;EGSE;Start PID data recording;;1;;;;00:10
@ -63,14 +64,14 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
135:00;EGSE/ MRL;Switch HPDV to closed & check if magnetic valve LED is on;;1;;;;00:10 135:00;EGSE/ MRL;Switch HPDV to closed & check if magnetic valve LED is on;;1;;;;00:10
134:50;EGSE/ MRL;Check warning lamp on HPSM;;1;;;;00:10 134:50;EGSE/ MRL;Check warning lamp on HPSM;;1;;;;00:10
134:40;MRL;Remove loose equipment;;1;;;;03:00 134:40;MRL;Remove loose equipment;;1;;;;03:00
131:40;EGSE;Activate Heizi;;1;;;;00:10 131:40;EGSE/ MRL;Turn ON & OFF Rocket Heater & confirm it's heating;;1;;;;00:10
131:30;EGSE;Activate N2O_Heater 1;;1;;;;00:10 131:30;EGSE/ MRL;Turn ON & OFF N2O_Heater 1 & confirm it's heating;;1;;;;00:10
131:20;EGSE;Activate N2O_Heater 2;;1;;;;00:10 131:20;EGSE/ MRL;Turn ON & OFF N2O_Heater 2 & confirm it's heating;;1;;;;00:10
131:10;EGSE;Activate He_Heater;;1;;;;00:10 131:10;EGSE/ MRL;Turn ON & OFF He_Heater & confirm it's heating;;1;;;;00:10
131:00;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;00:10 131:00;OBDH;Verify Rocket Heater @ RDVT & RDVET;;1;;;;00:10
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10 130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10 130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10
130:30;EGSE;Deactivate Heizi;;1;;;;00:10 130:30;EGSE;Deactivate Rocket Heater;;1;;;;00:10
130:20;EGSE/ MRL;Check OxV1 (CLD & RT_VI);;1;;;;00:10 130:20;EGSE/ MRL;Check OxV1 (CLD & RT_VI);;1;;;;00:10
130:10;EGSE/ MRL;Check OxV2 (CLD & RT_VI);;1;;;;00:10 130:10;EGSE/ MRL;Check OxV2 (CLD & RT_VI);;1;;;;00:10
130:00;EGSE/ MRL;Check MPV3 (CLD & RT_VI);;1;;;;00:10 130:00;EGSE/ MRL;Check MPV3 (CLD & RT_VI);;1;;;;00:10
@ -80,16 +81,16 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
129:20;EGSE/ MRL;Check RDV (CLD & RT_VI);;1;;;;00:10 129:20;EGSE/ MRL;Check RDV (CLD & RT_VI);;1;;;;00:10
129:10;EGSE/ MRL;Check RMOxOV (CLD & RT_VI);;1;;;;00:10 129:10;EGSE/ MRL;Check RMOxOV (CLD & RT_VI);;1;;;;00:10
129:00;EGSE/ MRL;Check RMOxSV (CLD & RT_VI);;1;;;;00:10 129:00;EGSE/ MRL;Check RMOxSV (CLD & RT_VI);;1;;;;00:10
128:50;OBDH;Activate Heizi;;1;;;;00:10 128:50;OBDH;Activate Rocket Heater;;1;;;;00:10
128:40;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;01:00 128:40;OBDH;Verify Rocket Heater @ RDVT & RDVET;;1;;;;01:00
127:40;OBDH/ MRL;Check RDV;;1;;;;00:10 127:40;OBDH/ MRL;Check RDV;;1;;;;00:10
127:30;OBDH/ MRL;Check RNCEV;;1;;;;00:10 127:30;OBDH/ MRL;Check RNCEV;;1;;;;00:10
127:20;OBDH/ MRL;Check RMOxOV;;1;;;;00:10 127:20;OBDH/ MRL;Check RMOxOV;;1;;;;00:10
127:10;OBDH/ MRL;Check RMOxSV;;1;;;;00:10 127:10;OBDH/ MRL;Check RMOxSV;;1;;;;00:10
127:00;OBDH/ MRL;Disable RNCEV;;1;;;;00:10 127:00;OBDH;Disable RNCEV;;1;;;;00:10
125:00;MRL;Confirm MBV closed;;1;;;; 125:00;MRL;Confirm MBV closed;;1;;;;
125:00;EGSE;Confirm that all valve switches are in OFF position (Except OxDV & HPDV);;1;;;;00:10 125:00;EGSE;Confirm that all valve switches are in OFF position (Except OxDV & HPDV);;1;;;;00:10
115:00;MRL/ EGSE;Check loadcell by applying force to it;;1;;;;00:20 115:00;EGSE/ MRL;Check loadcell by applying force to it;;1;;;;00:20
114:40;OBDH;Check RHPPT shows atmosphere;;1;;;; 114:40;OBDH;Check RHPPT shows atmosphere;;1;;;;
114:40;OBDH;Check ROxTPT shows atmosphere;;1;;;; 114:40;OBDH;Check ROxTPT shows atmosphere;;1;;;;
114:40;OBDH;Check RIHPT shows atmosphere;;1;;;; 114:40;OBDH;Check RIHPT shows atmosphere;;1;;;;
@ -109,7 +110,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
114:00;MCC;BEGIN SEQUENCE: Ignition signal Test;Ignition signal Test;1;;;;01:00 114:00;MCC;BEGIN SEQUENCE: Ignition signal Test;Ignition signal Test;1;;;;01:00
113:00;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;; 113:00;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;;
113:00;MRL;Connect Ignition test receptical;;1;;;; 113:00;MRL;Connect Ignition test receptical;;1;;;;
113:00;EGSE @MRL;Plug in Bridges B1 and B2;;1;;;; 113:00;EGSE @MRL;Plug in Bridges B1 and B2 into EGSE;;1;;;;
113:00;MRL;Confirm Soundsignal from Ignition Umbilical;;1;;;; 113:00;MRL;Confirm Soundsignal from Ignition Umbilical;;1;;;;
113:00;EGSE;Turn on Ignition Secure Switch;;1;;;; 113:00;EGSE;Turn on Ignition Secure Switch;;1;;;;
113:00;EGSE/ OBDH;Turn on Ignition Switch for 2 Second & Confirm ignition signal received at sbRio & cRio;;1;;;; 113:00;EGSE/ OBDH;Turn on Ignition Switch for 2 Second & Confirm ignition signal received at sbRio & cRio;;1;;;;
@ -117,7 +118,6 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
113:00;EGSE;Turn off Ignition Secure Switch;;1;;;; 113:00;EGSE;Turn off Ignition Secure Switch;;1;;;;
113:00;EGSE @MRL;Remove Bridges B1 and B2;;1;;;; 113:00;EGSE @MRL;Remove Bridges B1 and B2;;1;;;;
113:00;MRL;Remove Ignition test receptical;;1;;;;03:00 113:00;MRL;Remove Ignition test receptical;;1;;;;03:00
113:00;MRL;Remove Ignition test receptical;;1;;;;03:00
110:00;MCC;BEGIN SEQUENCE: Ground segment pressure test (PHASE YELLOW) ;GSE Pressure Test;2;LuF, AlS, LeD: 1x Helm, 3x Ear protectors;ChB, FiH, JuL, LiA, MiS;; 110:00;MCC;BEGIN SEQUENCE: Ground segment pressure test (PHASE YELLOW) ;GSE Pressure Test;2;LuF, AlS, LeD: 1x Helm, 3x Ear protectors;ChB, FiH, JuL, LiA, MiS;;
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10 130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10 130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10
@ -137,7 +137,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
107:00;EGSE;Confirm HPV1 is closed;;2;;;; 107:00;EGSE;Confirm HPV1 is closed;;2;;;;
107:00;EGSE;Confirm MPV1/2 is closed;;2;;;; 107:00;EGSE;Confirm MPV1/2 is closed;;2;;;;
107:00;MRL;Open He Bottle 1;;2;;;;01:00 107:00;MRL;Open He Bottle 1;;2;;;;01:00
106:00;MRL;Check & compare pressure HPPT1 with HPPG1 (max 300 bar);;2;;;; 106:00;EGSE/ MRL;Check & compare pressure HPPT1 with HPPG1 (max 300 bar);;2;;;;
106:00;MRL;Check Gastech Silver HPPR1 (max 300 to 50 bar);;2;;;; 106:00;MRL;Check Gastech Silver HPPR1 (max 300 to 50 bar);;2;;;;
106:00;MRL;Check Harris PPR (50 to 8 bar);;2;;;; 106:00;MRL;Check Harris PPR (50 to 8 bar);;2;;;;
106:00;MRL;Check pneumatic PPG (8 bar);;2;;;; 106:00;MRL;Check pneumatic PPG (8 bar);;2;;;;
@ -158,14 +158,15 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
0:00;EGSE;Open HPV1;;2;;;; 0:00;EGSE;Open HPV1;;2;;;;
0:00;EGSE;"Open & Close HPV2 STEPWISE untile HPPT2 equal to HPLPT and check for leakage @HPPT2 (If leakage occurs proceed to passivation Procedure out of sequence)";;2;;;; 0:00;EGSE;"Open & Close HPV2 STEPWISE untile HPPT2 equal to HPLPT and check for leakage @HPPT2 (If leakage occurs proceed to passivation Procedure out of sequence)";;2;;;;
0:00;EGSE;Close HPV1;;2;;;; 0:00;EGSE;Close HPV1;;2;;;;
0:00;EGSE;Open HPDV & confirm HPLPT 0 Bar;;2;;;; 0:00;EGSE;Open STEPWISE HPDV & confirm HPLPT 0 Bar;;2;;;;
0:00;EGSE;Open HPV2 & confirm HPPT2 0 Bar;;2;;;; 0:00;EGSE;Open STEPWISE HPV2 & confirm HPPT2 0 Bar;;2;;;;
0:00;EGSE;Close HPV2;;2;;;; 0:00;EGSE;Close HPV2;;2;;;;
0:00;EGSE;Close HPDV;;2;;;; 0:00;EGSE;Close HPDV;;2;;;;
87:10;EGSE;Open & Close STEPWISE MPV1/2 to 50 Bar @ OxInPT1 & OxInPT2;;2;;;; 87:10;EGSE;Open & Close STEPWISE MPV1/2 to 50 Bar @ OxInPT1 & OxInPT2;;2;;;;
87:10;EGSE;Confirm MPV1/2 closed;;2;;;; 87:10;EGSE;Confirm MPV1/2 closed;;2;;;;
87:10;EGSE;Open OxDV;;2;;;; 87:10;EGSE;Open OxDV;;2;;;;
87:10;EGSE;Open & Close STEPWISE MPV3 to 0 Bar @OxOutPT;;2;;;; 87:10;EGSE;Open & Close STEPWISE MPV3 & Confirm 0 Bar @OxOutPT;;2;;;;
87:10;EGSE;Confirm OxOutPT 0 Bar;;2;;;;
87:10;EGSE;Check OxInPT1 and OxInPT2 for leakage (If leakage occurs proceed to passivation Procedure out of sequence);;2;;;; 87:10;EGSE;Check OxInPT1 and OxInPT2 for leakage (If leakage occurs proceed to passivation Procedure out of sequence);;2;;;;
87:10;EGSE;Confirm MPV3 closed;;2;;;; 87:10;EGSE;Confirm MPV3 closed;;2;;;;
87:10;EGSE;Open & Close STEPWISE OxV1 to 0 Bar @OxInPT1;;2;;;; 87:10;EGSE;Open & Close STEPWISE OxV1 to 0 Bar @OxInPT1;;2;;;;
@ -178,34 +179,32 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
103:10;EGSE;Move arm away from rocket;;2;;;; 103:10;EGSE;Move arm away from rocket;;2;;;;
103:10;EGSE;Move arm to rocket;;2;;;;01:00 103:10;EGSE;Move arm to rocket;;2;;;;01:00
102:10;MRL;Close He Bottle 1 and check HPSM for leakage (If leakage occurs proceed to passivation Procedure out of sequence);;2;;;;01:00 102:10;MRL;Close He Bottle 1 and check HPSM for leakage (If leakage occurs proceed to passivation Procedure out of sequence);;2;;;;01:00
101:10;EGSE;Confirm no high pressures in Ground Segment;;2;;;;
101:10;MRL;Open MBV;;2;;;; 101:10;MRL;Open MBV;;2;;;;
101:10;EGSE/ MRL;Check and compare pressure HPPT1 with HPPG1 0 Bar;;2;;;; 101:10;EGSE/ MRL;Check and compare pressure HPPT1 with HPPG1 0 Bar;;2;;;;
101:10;MRL;Close MBV;;2;;;;00:30 101:10;MRL;Close MBV;;2;;;;00:30
100:40;MRL;Safety is ensured;;2;;;; 100:40;MRL;Safety is ensured;;2;;;;
100:40;MCC;EGSE @MRL to MRL;;1;;;; 100:40;MCC;EGSE @MRL Go to MRL;;1;;;;
100:40;EGSE;Switch OFF N20 coupling;;1;;;; 100:40;EGSE;Switch OFF N20 coupling;;1;;;;
100:40;EGSE;Switch OFF He coupling;;1;;;; 100:40;EGSE;Switch OFF He coupling;;1;;;;
100:40;MRL;Confirm working personel is grounded;;1;;;;01:00
100:40;MRL;Confirm PPG 0 Bar;;1;;;;00:20 100:40;MRL;Confirm PPG 0 Bar;;1;;;;00:20
100:40;MRL;Release Pneumatic lines of couplings;;1;;;;00:20 100:40;MRL;Release Pneumatic lines of couplings @HPSM;;1;;;;00:20
100:20;EGSE;Confirm Fueling arm is switched OFF;;1;;;; 100:20;EGSE;Confirm Fueling arm is switched OFF;;1;;;;
100:20;EGSE;Confirm OxOutPT and HPLPT 0 bar;;1;;;; 100:20;EGSE;Confirm OxOutPT and HPLPT 0 bar;;1;;;;
100:20;MRL;Couple He coupling;;1;;;;00:30 100:20;MRL;Couple He coupling & Confirm it is connected properly;;1;;;;00:30
99:50;MRL;Couple N2O coupling;;1;;;;00:30 99:50;MRL;Couple N2O coupling & Confirm it is connected properly;;1;;;;00:30
99:50;MRL;Confirm He coupling is connected properly;;1;;;; 100:40;MRL;Reattach Pneumatic Line to Fueling arm @HPSM;;1;;;;00:20
99:50;MRL;Confirm N2O coupling is connected properly;;1;;;;
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10 130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10 130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10
99:20;MRL;HOLD;HOLD;1;;;; 99:20;MCC;HOLD;HOLD;1;;;;
99:20;MCC;CONTINUE AFTER HOLD;;1;;;; 99:20;MCC;CONTINUE AFTER HOLD;;1;;;;
99:20;MRL;BEGIN SEQUENCE: On Board System Test;On Board System Test;2;;;; 99:20;MCC;BEGIN SEQUENCE: On Board System Test;On Board System Test;2;;;;
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10 130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;1;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10 130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;1;;;;00:10
99:40;OBDH;Check RDV;;2;;;;00:10 99:40;OBDH;Check RDV;;2;;;;00:10
99:30;OBDH;Check RNCEV;;2;;;;00:10
99:20;OBDH;Check RMOxOV;;2;;;;00:10 99:20;OBDH;Check RMOxOV;;2;;;;00:10
99:10;OBDH;Check RMOxSV;;2;;;;00:10 99:10;OBDH;Check RMOxSV;;2;;;;00:10
99:00;OBDH;Disable RNCEV;;2;;;;00:10 99:00;OBDH;Confirm RNCEV is disabled;;2;;;;00:10
0:00;MRL;Confirm working personel is grounded;;2;;;;01:00 0:00;MRL;Confirm working personel is grounded;;2;;;;01:00
0:00;OBDH;Disconnect from sbRio;;1;;;; 0:00;OBDH;Disconnect from sbRio;;1;;;;
0:00;EGSE;Turn ON EPS_BAT (Rocket OFF);;2;;;;01:00 0:00;EGSE;Turn ON EPS_BAT (Rocket OFF);;2;;;;01:00
@ -225,22 +224,22 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
0:00;EGSE;Turn OFF EPS_BAT (Rocket ON);;2;;;;01:00 0:00;EGSE;Turn OFF EPS_BAT (Rocket ON);;2;;;;01:00
0:00;EGSE @MRL;Confirm MAIN_BUS LED is ON;;1;;;; 0:00;EGSE @MRL;Confirm MAIN_BUS LED is ON;;1;;;;
0:00;EGSE @MRL;Confirm 1 beep at Telemega;;1;;;; 0:00;EGSE @MRL;Confirm 1 beep at Telemega;;1;;;;
0:00;MRL;Confirm 3 beeps at OBC1;;1;;;;
0:00;EGSE @MRL;Remove BLACKBOX2 RADIO SILENCE Bridge (3R);;1;;;; 0:00;EGSE @MRL;Remove BLACKBOX2 RADIO SILENCE Bridge (3R);;1;;;;
139:50;OBDH;Connect to sbRio using remote Access utility;;1;;;; 139:50;OBDH;Connect to sbRio using remote Access utility;;1;;;;
139:50;MRL;Confirm 3 beeps at OBC1;;1;;;;
139:50;OBDH;Open RT_Sub_HMI;;1;;;; 139:50;OBDH;Open RT_Sub_HMI;;1;;;;
139:50;OBDH;Confirm Main Chute button is disabled;;1;;;; 139:50;OBDH;Confirm Main Chute button is disabled;;1;;;;
135:40;OBDH;Check EPS hardware Voltages;;1;;;;00:10 135:40;OBDH;Check EPS hardware Voltages;;1;;;;00:10
0:00;EGSE;Check EGSE Currents;;1;;;;00:10 0:00;EGSE;Check EGSE Currents;;1;;;;00:10
125:30;PYL;Confirm CanSat is running;;3;;;;00:20 125:30;PYL;Confirm CanSat is running;;1;;;;00:20
125:30;PYL;Confirm BlackBox2 is running;;3;;;; 125:30;PYL;Confirm BlackBox2 is running;;1;;;;
125:30;EGSE;Turn OFF EPS_EXT_24V;;3;;;; 125:30;EGSE;Turn OFF EPS_EXT_24V;;1;;;;
125:30;PYL;Confirm CanSat is running;;3;;;;00:20 125:30;PYL;Confirm CanSat is running;;1;;;;00:20
125:30;PYL;Confirm BlackBox2 is running;;3;;;; 125:30;PYL;Confirm BlackBox2 is running;;1;;;;
125:30;EGSE;Turn ON EPS_EXT_24V;;3;;;; 125:30;EGSE;Turn ON EPS_EXT_24V;;1;;;;
0:00;OBDH;Disconnect from sbRio;;1;;;; 0:00;OBDH;Disconnect from sbRio;;1;;;;
99:20;EGSE;Turn ON EPS_BAT (Rocket OFF);;2;;;;01:00 99:20;EGSE;Turn ON EPS_BAT (Rocket OFF);;1;;;;01:00
99:20;MRL;BEGIN SEQUENCE: Prime Rocket;Prime Rocket;2;;;; 99:20;MCC;BEGIN SEQUENCE: Prime Rocket;Prime Rocket (PHASE YELLOW);2;;;;
99:20;EGSE;Confirm EPS_BAT is ON (Rocket OFF);;2;;;;01:00 99:20;EGSE;Confirm EPS_BAT is ON (Rocket OFF);;2;;;;01:00
99:20;MRL;Confirm working personel is grounded;;2;;;;01:00 99:20;MRL;Confirm working personel is grounded;;2;;;;01:00
99:20;MRL;Confirm that RMDV is closed;;2;;;;01:00 99:20;MRL;Confirm that RMDV is closed;;2;;;;01:00
@ -258,8 +257,8 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
95:10;EGSE @MRL;Leave MRL & return to MCC;;2;;;; 95:10;EGSE @MRL;Leave MRL & return to MCC;;2;;;;
99:20;MRL;Connect Ignition Umbilical;;2;;;;00:30 99:20;MRL;Connect Ignition Umbilical;;2;;;;00:30
95:10;OPS;Elevate MRL to 90 degrees;;2;;;;05:00 95:10;OPS;Elevate MRL to 90 degrees;;2;;;;05:00
89:40;EGSE;Zero OxTank Mass;;2;;;;01:00
88:40;MCC;BEGIN SEQUENCE: Fueling Preparations (PHASE YELLOW);Fueling Preparations;2;;;; 88:40;MCC;BEGIN SEQUENCE: Fueling Preparations (PHASE YELLOW);Fueling Preparations;2;;;;
89:40;EGSE;Zero OxTank Mass;;2;;;;01:00
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10 130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10 130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10
88:40;MRL;Put on safety equipment;;2;;;;00:30 88:40;MRL;Put on safety equipment;;2;;;;00:30
@ -271,11 +270,11 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
0:00;EGSE;Open HPV1;;2;;;; 0:00;EGSE;Open HPV1;;2;;;;
0:00;EGSE;"Open & Close HPV2 STEPWISE untile HPPT2 equal to HPLPT and check for leakage @HPPT2 (If leakage occurs continue with ""GSE Passivation Procedure"")";;2;;;; 0:00;EGSE;"Open & Close HPV2 STEPWISE untile HPPT2 equal to HPLPT and check for leakage @HPPT2 (If leakage occurs continue with ""GSE Passivation Procedure"")";;2;;;;
0:00;EGSE;Close HPV1;;2;;;; 0:00;EGSE;Close HPV1;;2;;;;
0:00;EGSE;Open HPDV & Confirm HPLPT 0 Bar;;2;;;; 0:00;EGSE;Open STEPWISE HPDV & Confirm HPLPT 0 Bar;;2;;;;
0:00;EGSE;Confirm HPV1 is closed;;2;;;; 0:00;EGSE;Confirm HPV1 is closed;;2;;;;
0:00;EGSE;Confirm HPV2 is closed;;2;;;; 0:00;EGSE;Confirm HPV2 is closed;;2;;;;
10:10;MRL;Open HPNV2 1/8 Rev;;2;;;;
0:00;EGSE;Close HPDV;;2;;;; 0:00;EGSE;Close HPDV;;2;;;;
10:10;MRL;Open HPNV2 1/8 Rev;;2;;;;
87:10;EGSE;Open & Close STEPWISE MPV1/2 to 50 Bar @ OxInPT1 & OxInPT2;;2;;;; 87:10;EGSE;Open & Close STEPWISE MPV1/2 to 50 Bar @ OxInPT1 & OxInPT2;;2;;;;
87:10;EGSE/ MRL;Check & compare OxInPT1 with OxInPG1 based on Bottle temperature (max 50 bar);;2;;;; 87:10;EGSE/ MRL;Check & compare OxInPT1 with OxInPG1 based on Bottle temperature (max 50 bar);;2;;;;
87:10;EGSE/ MRL;Check & compare pressure OxInPT2 with OxInPG2 based on Bottle temperature (max 50 bar);;2;;;; 87:10;EGSE/ MRL;Check & compare pressure OxInPT2 with OxInPG2 based on Bottle temperature (max 50 bar);;2;;;;
@ -294,30 +293,28 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
78:40;MCC;Turn OFF MRL confirm lock;;2;;;; 78:40;MCC;Turn OFF MRL confirm lock;;2;;;;
78:40;ALL;Inform OPS to clear Launch Pad (Tel.: [!!!]);;2;;;;02:00 78:40;ALL;Inform OPS to clear Launch Pad (Tel.: [!!!]);;2;;;;02:00
147:20;WIND;Start wind weighting analysis;;2;;;; 147:20;WIND;Start wind weighting analysis;;2;;;;
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10 130:50;EGSE;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10 130:40;EGSE;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10
68:40;MCC;HOLD;HOLD;2;;;; 68:40;MCC;HOLD;HOLD;2;;;;
68:40;KLP;Start Camera Karsten Lappöhn;;2;;;; 68:40;KLP;Start Camera Karsten Lappöhn;;2;;;;
68:40;MCC;CONTINUE AFTER HOLD;;2;;;; 68:40;MCC;CONTINUE AFTER HOLD;;2;;;;
130:50;EGSE/ MRL;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10 130:50;EGSE;Check Bottle Temperatures @ OxT1, OxT2, HPT2. If above 30C aknowledge high temperature. If above 35C enter HOLD;;2;;;;00:10
130:40;EGSE/ MRL;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10 130:40;EGSE;Check Water Temperatures @ OxWT1, OxWT2, HPWT2;;2;;;;00:10
130:40;EGSE;Confirm storage capacity of CRio is greater than 300MB;;2;;;;00:10 130:40;EGSE;Confirm storage capacity of CRio is greater than 300MB;;2;;;;00:10
127:00;OBDH;Confirm RNCEV is disabled;;2;;;;00:10
68:40;MCC;BEGIN SEQUENCE Ox Fueling (PHASE RED);Ox Fueling (PHASE RED);3;;;; 68:40;MCC;BEGIN SEQUENCE Ox Fueling (PHASE RED);Ox Fueling (PHASE RED);3;;;;
68:50;WIND;Report on weather situation;;3;;;; 68:50;WIND;Report on weather situation;;3;;;;
68:40;MCC;Announce end of Radio Silence;;3;;;; 68:40;MCC;Announce end of Radio Silence;;3;;;;
68:40;EGSE;Turn OFF EPS_BAT (Rocket ON);;3;;;; 68:40;EGSE;Turn OFF EPS_BAT (Rocket ON);;3;;;;
0:00;OBDH;Connect to sbRio using remote Access utility;;1;;;;
0:00;MCC;Confirm 3 beeps at OBC1;;1;;;; 0:00;MCC;Confirm 3 beeps at OBC1;;1;;;;
0:00;OBDH;Open RT_Sub_HMI;;1;;;; 0:00;OBDH;Connect to sbRio using remote Access utility;;3;;;;
0:00;OBDH;Confirm Main Chute button is disabled;;1;;;; 0:00;OBDH;Open RT_Sub_HMI;;3;;;;
0:00;OBDH;Check EPS hardware Voltages;;1;;;;00:10 0:00;OBDH;Confirm RNCEV is disabled;;3;;;;00:10
0:00;EGSE;Check EGSE Currents;;1;;;;00:10 0:00;OBDH;Confirm Main Chute button is disabled;;3;;;;
0:00;OBDH;Check EPS hardware Voltages;;3;;;;00:10
0:00;EGSE;Check EGSE Currents;;3;;;;00:10
126:50;OBDH/ TMTC;Confirm RF451-Link;;3;;;;00:20 126:50;OBDH/ TMTC;Confirm RF451-Link;;3;;;;00:20
126:30;TMTC;Confirm GPS-lock;;3;;;;00:20 126:30;TMTC;Confirm GPS-lock;;3;;;;00:20
126:10;TMTC;Confirm Telemega-Link;;3;;;;00:20 126:10;TMTC;Confirm Telemega-Link;;3;;;;00:20
125:50;OBDH;Test Connection to STX3;;3;;;;00:20
125:30;OBDH;Confirm that STX3 Packages are received by email;;3;;;;00:30
125:30;AVC;Turn on main TMTC screen;;3;;;;00:30 125:30;AVC;Turn on main TMTC screen;;3;;;;00:30
125:30;PYL;Confirm CanSat is running;;3;;;;00:20 125:30;PYL;Confirm CanSat is running;;3;;;;00:20
125:30;PYL;Confirm BlackBox2 is running;;3;;;; 125:30;PYL;Confirm BlackBox2 is running;;3;;;;
@ -352,7 +349,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
11:20;EGSE;Close OxDV;;3;;;;01:00 11:20;EGSE;Close OxDV;;3;;;;01:00
10:20;EGSE;Write down OxTankMass;;3;;;; 10:20;EGSE;Write down OxTankMass;;3;;;;
33:40;EGSE;Verify He Bottle 2 Temperature @HPT2 & @HPWT2 (turn ON He_Heater if necessary) ;;3;;;;00:10 33:40;EGSE;Verify He Bottle 2 Temperature @HPT2 & @HPWT2 (turn ON He_Heater if necessary) ;;3;;;;00:10
10:20;MCC;Provide OxTankMass and temperature readings to Wind weighting station;;3;;;;00:30 10:20;MCC;Provide OxTankMass and temperature readings to Wind weighting station Tel[!!!];;3;;;;00:30
9:50;EGSE;Confirm OxV1 & OxV2 closed;;3;;;; 9:50;EGSE;Confirm OxV1 & OxV2 closed;;3;;;;
9:50;EGSE;Confirm OxOutPT 0 Bar;;3;;;; 9:50;EGSE;Confirm OxOutPT 0 Bar;;3;;;;
9:50;EGSE;Decouple N2O coupling;;3;;;;00:20 9:50;EGSE;Decouple N2O coupling;;3;;;;00:20
@ -372,7 +369,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
8:15;MCC;CONTINUE AFTER HOLD;;3;;;; 8:15;MCC;CONTINUE AFTER HOLD;;3;;;;
8:15;AVC;Start Video recording in Block House;;3;;;; 8:15;AVC;Start Video recording in Block House;;3;;;;
8:15;EGSE;Verify He Bottle 2 Temperature @HPT2 & @HPWT2 (turn ON/OFF He_Heater if necessary) ;;3;;;;00:10 8:15;EGSE;Verify He Bottle 2 Temperature @HPT2 & @HPWT2 (turn ON/OFF He_Heater if necessary) ;;3;;;;00:10
8:15;MCC;BEGIN SEQUENCE: Switching to Internal Power Sequence;Switch to Internal Power;3;;;; 8:15;MCC;BEGIN SEQUENCE: Switching to Internal Power;Switch to Internal Power;3;;;;
8:15;EGSE;Turn OFF EPS_EXT_24V (Switch to internal Power);;3;;;;00:20 8:15;EGSE;Turn OFF EPS_EXT_24V (Switch to internal Power);;3;;;;00:20
7:55;OBDH;Confirm EPS Voltages are within limits;;3;;;;00:10 7:55;OBDH;Confirm EPS Voltages are within limits;;3;;;;00:10
7:45;OBDH;Confirm RF451 Transmitting;;3;;;;00:05 7:45;OBDH;Confirm RF451 Transmitting;;3;;;;00:05
@ -392,7 +389,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
6:05;OBDH/ EGSE;Check for leakage & HPLPT 0 Bar & RHPPT 300 Bar ;;3;;;;02:00 6:05;OBDH/ EGSE;Check for leakage & HPLPT 0 Bar & RHPPT 300 Bar ;;3;;;;02:00
6:05;EGSE;Turn OFF He_Heater;;3;;;; 6:05;EGSE;Turn OFF He_Heater;;3;;;;
4:05;OBDH;Acknowledge end of Fueling;;3;;;;00:10 4:05;OBDH;Acknowledge end of Fueling;;3;;;;00:10
3:55;MCC;Confirm End of Fueling to OPS;;3;;;;00:20 3:55;MCC;Confirm End of High-Pressure Fueling to OPS;;3;;;;00:20
3:35;MCC;BEGIN SEQUENCE: Disconnecting Fueling Arm;Disconnecting Fueling Arm;3;;;;00:10 3:35;MCC;BEGIN SEQUENCE: Disconnecting Fueling Arm;Disconnecting Fueling Arm;3;;;;00:10
3:25;EGSE;Confirm HPV1 & HPV2 closed;;3;;;;00:10 3:25;EGSE;Confirm HPV1 & HPV2 closed;;3;;;;00:10
3:15;EGSE;Confirm HPLPT 0 Bar ;;3;;;;00:10 3:15;EGSE;Confirm HPLPT 0 Bar ;;3;;;;00:10
@ -401,6 +398,7 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
2:35;EGSE;Move fueling arm away from rocket;;3;;;;00:40 2:35;EGSE;Move fueling arm away from rocket;;3;;;;00:40
1:55;MCC;Confirm Fueling Arm away to OPS;;3;;;;00:15 1:55;MCC;Confirm Fueling Arm away to OPS;;3;;;;00:15
1:40;MCC;Prepare for Launch;;3;;;;00:10 1:40;MCC;Prepare for Launch;;3;;;;00:10
1:40;EGSE;Activate High-Speed data recording;;3;;;;00:10
1:30;OBDH;Confirm ready for launch;;3;;;;00:10 1:30;OBDH;Confirm ready for launch;;3;;;;00:10
1:20;EGSE;Confirm ready for launch;;3;;;;00:10 1:20;EGSE;Confirm ready for launch;;3;;;;00:10
1:10;MCC;Set Go/No-Go System to Go;;3;;;;00:10 1:10;MCC;Set Go/No-Go System to Go;;3;;;;00:10
@ -441,18 +439,19 @@ vers.;v4.31;Launch Procedure;;0;MRL;MCC;RdHill;Time per step
0:00;EGSE;Confirm pressure HPLPT & HPPT2 0 Bar;;2;;;; 0:00;EGSE;Confirm pressure HPLPT & HPPT2 0 Bar;;2;;;;
0:00;EGSE;Close HPV2;;2;;;; 0:00;EGSE;Close HPV2;;2;;;;
0:00;EGSE;Close HPDV;;2;;;; 0:00;EGSE;Close HPDV;;2;;;;
0:00;MRL;Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN...;;2;;;; 0:00;MRL;Go to MRL, confirm HPPG2 0 Bar, else return to Block House, THEN...;;2;;;;
0:00;MRL;Close He Bottle 1, THEN ...;;2;;;; 0:00;MRL;Close He Bottle 1, THEN ...;;2;;;;
0:00;MRL;Open ComTerm;;2;;;; 0:00;MRL;Open ComTerm;;2;;;;
8:15;MCC;Turn ON ComTerm step delay;;2;;;; 8:15;MCC;Turn ON ComTerm step delay;;2;;;;
0:00;MRL;Write down remaining Pressure of He Bottle 1;;2;;;; 8:00;MCC;Turn OFF MRL confirm lock;;2;;;;
0:00;EGSE/ MRL;Write down remaining Pressure of He Bottle 1;;2;;;;
0:00;MRL;Step back;;2;;;; 0:00;MRL;Step back;;2;;;;
0:00;EGSE;Open HPDV;;2;;;; 0:00;EGSE;Open HPDV;;2;;;;
0:00;EGSE;Open HPV1;;2;;;; 0:00;EGSE;Open HPV1;;2;;;;
0:00;EGSE;Confirm pressure HPLPT & HPPT1 0 Bar;;2;;;; 0:00;EGSE;Confirm pressure HPLPT & HPPT1 0 Bar;;2;;;;
0:00;EGSE;Close HPV1;;2;;;; 0:00;EGSE;Close HPV1;;2;;;;
0:00;EGSE;Close HPDV;;2;;;; 0:00;EGSE;Close HPDV;;2;;;;
0:00;EGSE;Pressure Check;;2;;;; 0:00;EGSE;Confirm no high pressures in Ground Segment;;2;;;;
0:00;MRL;Open MBV;;2;;;; 0:00;MRL;Open MBV;;2;;;;
0:00;EGSE/ MRL;Check and compare pressure HPPT1 with HPPG1;;2;;;; 0:00;EGSE/ MRL;Check and compare pressure HPPT1 with HPPG1;;2;;;;
0:00;MRL;Close MBV;;2;;;; 0:00;MRL;Close MBV;;2;;;;

Can't render this file because it contains an unexpected character in line 159 and column 11.

2
PassivationProcedure.csv
View File

@ -1,4 +1,4 @@
vers.;v4.31;Passivation out of sequence Procedure;;2;mrl;mcc;rdh;time vers.;v4.32;Passivation out of sequence Procedure;;2;mrl;mcc;rdh;time
0:00;MCC;BEGIN SEQUENCE: Prepare Passivation;Prepare Passivation;2;;;; 0:00;MCC;BEGIN SEQUENCE: Prepare Passivation;Prepare Passivation;2;;;;
0:00;MCC/MRL;Recall and make sure BOTH N2O Bottles & He Bottle 2 are still closed! Else continue with Abort Procedure;;2;;;; 0:00;MCC/MRL;Recall and make sure BOTH N2O Bottles & He Bottle 2 are still closed! Else continue with Abort Procedure;;2;;;;
0:00;MCC;Inform OPS of Passivation out of sequence;;2;;;; 0:00;MCC;Inform OPS of Passivation out of sequence;;2;;;;

1 vers. v4.31 v4.32 Passivation out of sequence Procedure 2 mrl mcc rdh time
2 0:00 MCC BEGIN SEQUENCE: Prepare Passivation Prepare Passivation 2
3 0:00 MCC/MRL Recall and make sure BOTH N2O Bottles & He Bottle 2 are still closed! Else continue with Abort Procedure 2
4 0:00 MCC Inform OPS of Passivation out of sequence 2