From 2849f64cc7b35cc831b04057f0800fe401407bcb Mon Sep 17 00:00:00 2001
From: Finn Hansch <fhansch@stud.hs-bremen.de>
Date: Thu, 28 May 2020 12:12:47 +0200
Subject: [PATCH] Added Temperature Checks about every 10 minutes And changed
 some semantic errors as well as some time stamps

---
 LaunchProcedure.csv | 49 +++++++++++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 19 deletions(-)

diff --git a/LaunchProcedure.csv b/LaunchProcedure.csv
index 35d8801..2817b8c 100644
--- a/LaunchProcedure.csv
+++ b/LaunchProcedure.csv
@@ -1,4 +1,4 @@
-vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
+vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 147:20;MCC;BEGIN SEQUENCE: Power on EGSE;Power on EGSE;1;;;;;
 147:20;EGSE;Check CLD connection;;1;;;;;
 147:20;EGSE;Switch ON CLD via Battery & check voltage (24 Volt);;1;;;;;
@@ -80,7 +80,7 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 127:10;OBDH;Check RMOxSV;;1;;;;00:10;
 127:00;OBDH;Confirm RNCEV is disabled;;1;;;;00:10;
 125:00;MRL;Confirm MBV closed;;1;;;;;
-125:00;EGSE;Confirm that all valve switches are in OFF position (Except OxDV & HPDV);;1;;;;10:00;
+125:00;EGSE;Confirm that all valve switches are in OFF position (Except OxDV & HPDV);;1;;;;0:10;
 115:00;MRL/EGSE;Check loadcell by applying force to it;;1;;;;00:20;
 114:40;OBDH;Check RHPPT shows atmosphere;;1;;;;;
 114:40;OBDH;Check ROxTPT shows atmosphere;;1;;;;;
@@ -110,6 +110,8 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 113:00;EGSE@MRL;Remove Bridges B1 and B2;;1;;;;;
 113:00;MRL;Remove Ignition test receptical;;1;;;;03:00;
 110:00;MCC;BEGIN SEQUENCE: pneumatic pressure test (PHASE YELLOW) ;Pneumatic Pressure Test;1;;;;;
+110:00;EGSE/MRL;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
+110:00;EGSE/MRL;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
 110:00;MRL;Confirm that all hatches are closed;;1;;;;01:00;
 109:00;MRL;Check He bottle 1 connector is attached;;1;;;;;
 109:00;MRL;Check He bottle 2 connector is attached;;1;;;;;
@@ -159,6 +161,8 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 100:20;MRL;Couple Helium coupling;;1;;;;00:30;
 99:50;MRL;Couple N2O coupling;;1;;;;00:30;
 99:20;MRL;HOLD;HOLD;1;;;;;
+99:20;EGSE/MRL;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
+99:20;EGSE/MRL;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
 99:20;MCC;CONTINUE AFTER HOLD;;;;;;;
 99:20;MRL;BEGIN SEQUENCE: Arming Rocket Part 1;Arming Rocket Pt.1;1;;;;;
 98:50;MRL;Turn on GoPro Camera at end of Launch Rail;;1;;;;00:20;
@@ -170,6 +174,8 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 90:10;EGSE;Powercycle EPS to to start flight mode on Telemega;;1;;;;00:30;
 89:40;EGSE;Calibrate loadcell (Set to 0);;1;;;;01:00;
 88:40;MCC;BEGIN SEQUENCE: Fueling Preparations (PHASE YELLOW);Fueling Preparations;2;;;;;
+89:40;EGSE/MRL;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
+89:40;EGSE/MRL;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
 88:40;MRL;Put on safety equipment;;2;;;;00:30;
 88:10;MRL;Open He Bottle 1;;2;;;;01:00;
 87:10;MRL;Step back;;2;;;;;
@@ -188,18 +194,21 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 80:40;MRL;Insert Ignition Bridges B1 and B2 into EGSE;;2;;;;02:00;
 78:40;MRL;Confirm Soundsignal from Ignition Umbilical;;2;;;;;
 78:40;MRL;Close ComTerm;;2;;;;;
+78:40;MCC;Turn Off MRL lock;;2;;;;;
 78:40;ALL;Clear Launchpad and inform OPS;;2;;;;10:00;
 68:40;KLP;Start Camera Karsten Lappöhn;;2;;;;;
 68:40;MCC;HOLD;HOLD;2;;;;;
+68:40;EGSE;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
+68:40;EGSE;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
 68:40;MCC;CONTINUE AFTER HOLD;;;;;;;
 68:40;MCC;BEGIN SEQUENCE Ox Fueling (PHASE RED);Ox Fueling (PHASE RED);3;;;;;
 68:40;MCC;Announce end of Radio Silence;;3;;;;;
-126:50;OBDH/TMTC;Check RF451-Link;;1;;;;00:20;
-126:30;TMTC;Confirm GPS-lock;;1;;;;00:20;
-126:10;TMTC;Confirm Telemega-Link;;1;;;;00:20;
-125:50;OBDH;Test Connection to STX3;;1;;;;00:20;
-125:30;OBDH;Confirm that STX3 Package received by email;;1;;;;00:30;
-125:30;MCC;Request Permission to begin fueling from OPS;;1;;;;03:00;
+68:40;OBDH/TMTC;Check RF451-Link;;1;;;;00:20;
+68:40;TMTC;Confirm GPS-lock;;1;;;;00:20;
+68:40;TMTC;Confirm Telemega-Link;;1;;;;00:20;
+68:40;OBDH;Test Connection to STX3;;1;;;;00:20;
+68:40;OBDH;Confirm that STX3 Package received by email;;1;;;;00:30;
+68:40;MCC;Request Permission to begin fueling from OPS;;1;;;;03:00;
 68:40;OBDH;Acknowledge start of Fueling;;3;;;;01:00;
 67:40;EGSE;Open & Close HPV1 STEPWISE to 50 Bar @ ROxTPT (stop at 30 bar and wait 30 seconds to check for leakage);;3;;;;;
 67:40;EGSE;Open & Close HPV1 STEPWISE to more than 50 Bar @ RHPPT and check ROxTPT 50 Bar;;3;;;;;
@@ -214,6 +223,8 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 67:40;MCC;Write down Time;;3;;;;;
 67:40;EGSE;Open OxV1;;3;;;;04:00;
 63:40;OBDH;Open & Close RDV STEPWISE until N2O bottle empty or 25kg OxTankMass, keep temperatures RDVT and RDVET above 10°C and Check delta ROxTPT and OxInPT1;;3;;;;30:00:00;
+33:40;EGSE;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
+33:40;EGSE;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
 33:40;EGSE;Close OxV1;;3;;;;00:10;
 33:30;EGSE;Check if Pressure rises in OxPT1, if Pressure rises relief via OxV1 or wait for Pressure relief valve;;3;;;;01:00;
 32:30;EGSE;Check & compare OxOutPT with OxInPT2;;3;;;;;
@@ -285,7 +296,7 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 0:00;OBDH;T+50: Verify RNCEV Open (Drogue);;4;;;;;
 0:00;OBDH;T+310: Verify Main Chute Deployed and RDV Open (Main);;4;;;;;
 0:00;OBDH;T+600: Verify (Landed);;4;;;;;
-0:00;MCC;START OF PASSIVATION (PHASE YELLOW) (Write down Time);Passivation;2;;;;;
+0:00;MCC;BEGIN SEQUENCE: PASSIVATION (PHASE YELLOW) (Write down Time);Passivation;2;;;;;
 0:00;MCC;Turn audio volume up;;2;;;;;
 0:00;TMTC;Check ROxTPT & RHPPT 1 Bar, if more: Open & Close STEPWISE RDV;;2;;;;;
 0:00;MRL;Go to Testrig, Close N2O Bottle 1 & N2O Bottle 2 then RETURN to Block House;;2;;;;;
@@ -298,17 +309,18 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 0:00;EGSE;Close OxV2;;2;;;;;
 0:00;EGSE;Close OxDV ;;2;;;;;
 0:00;MRL;Go to MRL, confirm OxInPG1 & OxInPG2 0 Bar, else RETURN to Block House, THEN...
-0:00;MRL;Close He Bottle 2;;2;;;;;
-0:00;MRL;Write down remaining Pressure of He Bottle 2;;2;;;;;
-0:00;MRL;Return to Block House
+0:00;MRL;Close He Bottle 2, THEN...;;2;;;;;
+0:00;MRL;Write down remaining Pressure of He Bottle 2, THEN...;;2;;;;;
+0:00;MRL;Return to Block House;;2;;;;;
 0:00;EGSE;Open HPDV;;2;;;;;
 0:00;EGSE;Open HPV2;;2;;;;;
 0:00;EGSE;Check pressure HPLPT & HPPT2 0 Bar;;2;;;;;
 0:00;EGSE;Close HPV2;;2;;;;;
 0:00;EGSE;Close HPDV;;2;;;;;
 0:00;MRL;Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN...;;2;;;;;
-0:00;MRL;Close He Bottle 1;;2;;;;;
+0:00;MRL;Close He Bottle 1, THEN ...;;2;;;;;
 0:00;MRL;Open ComTerm;;2;;;;;
+0:00;MCC;Turn on MRL lock;;2;;;;;
 0:00;MRL;Write down remaining Pressure of He Bottle 1;;2;;;;;
 0:00;MRL;Step back;;2;;;;;
 0:00;EGSE;Open HPDV;;2;;;;;
@@ -318,19 +330,18 @@ vers.;v4.3;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 0:00;EGSE;Close HPDV;;2;;;;;
 0:00;EGSE;Pressure Check;;2;;;;;
 0:00;MRL;Open MBV;;2;;;;;
-0:00;EGSE;Check and compare pressure HPPT1 with HPPG1;;2;;;;;
+0:00;EGSE/MRL;Check and compare pressure HPPT1 with HPPG1;;2;;;;;
 0:00;MRL;Close MBV;;2;;;;;
 0:00;MRL;Take out B1 & B2 Bridges;;2;;;;;
 0:00;MRL;Safety is ensured;;2;;;;;
 0:00;MCC;Confirm to OPS that Safety is ensured;;1;;;;;
-0:00;MCC;END OF PASSIVATION (PHASE GREEN) (Write down Time);;1;;;;;
-0:00;MCC;START DATA COLLECTION (Write down Time);Collection;1;;;;;
+0:00;MCC;BEGIN SEQUENCE: Data collection;Data collection;1;;;;;
 0:00;AVC;Turn off GoPro & Camcorder & Stop Block House Video recording;;1;;;;;
 0:00;EGSE;Copy PID.vi.tdms & save to new name;;1;;;;;
 0:00;EGSE;Wait for buffer storage process to be finished;;1;;;;;
 0:00;EGSE;save data files from cRIO to PC;;1;;;;;
 0:00;AVC;End audio recording;;1;;;;;
-0:00;MCC;END OF PROCEDURE (Write Down Time);;1;;;;;
+0:00;MCC;Stop ComTerm and save logfile to external HDD, THEN...;;1;;;;;
+0:00;MCC;Restart ComTerm VI;;1;;;;;
 0:00;AVC;Save video & audio data on external HDD;;1;;;;;
-0:00;MCC;Stop RT_CD.vi and save logfile to external HDD;;1;;;;;
-0:00;MCC;PROCEDURE FINISHED;End;1;;;;;
+0:00;MCC;END OF PROCEDURE;;1;;;;;