diff --git a/LaunchProcedure.csv b/LaunchProcedure.csv
index d9c97c5..5eca0b6 100644
--- a/LaunchProcedure.csv
+++ b/LaunchProcedure.csv
@@ -1,4 +1,4 @@
-vers.;v4.14;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
+vers.;v4.15;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 147:20;WIND;Start wind weighting analysis;;1;;;;;
 147:20;MCC;BEGIN SEQUENCE: Power on EGSE;Power on EGSE;1;;;;;
 147:20;EGSE;Check CLD connection;;1;;;;;
@@ -54,8 +54,8 @@ vers.;v4.14;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 135:50;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;;;
 135:40;OBDH;Check EPS hardware Voltages;;1;;;;00:10;
 135:30;EGSE;Start PID data recording;;1;;;;00:10;
-135:20;MRL;Close HPNV 1;;1;;;;00:10;
-135:20;MRL;Close HPNV 2;;1;;;;00:10;
+135:20;MRL;Close HPNV1;;1;;;;00:10;
+135:20;MRL;Close HPNV2;;1;;;;00:10;
 135:10;EGSE/ MRL;Switch OxDV to closed & check if magnetic valve LED is on;;1;;;;00:10;
 135:00;EGSE/ MRL;Switch HPDV to closed & check if magnetic valve LED is on;;1;;;;00:10;
 134:50;EGSE/ MRL;Check warning lamp on HPSM;;1;;;;00:10;
@@ -148,10 +148,10 @@ vers.;v4.14;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 105:00;EGSE/ MRL;Open & Close OxV2 SHORTLY;;2;;;;;
 105:00;EGSE/ MRL;Open & Close OxDV SHORTLY;;2;;;;;
 105:00;EGSE/ MRL;Open & Close MPV3 SHORTLY;;2;;;;;
-00:00;MRL;Open HPNV1;;2;;;;;;
+00:00;MRL;Open HPNV1 completely;;2;;;;;;
 00:00;MRL;Step Back;;2;;;;;;
 00:00;EGSE;Open & Close HPV1 STEPWISE untile HPLPT equal to HPPT1 and check for leakage @HPLPT (If leakage occurs continue with "GSE Passivation Procedure");;2;;;;;
-00:00;EGSE;Confirm RHPPT & RoxTPT less than 1 Bar (on Pressure continue with "Rocket Passivation Procedure");;2;;;;;
+00:00;EGSE;Confirm RHPPT & RoxTPT 1 Bar (on Pressure continue with "Rocket Passivation Procedure");;2;;;;;
 00:00;EGSE;Open HPV1;;2;;;;;
 00:00;EGSE;Open & Close HPV2 STEPWISE untile HPPT2 equal to HPLPT and check for leakage @HPPT2 (If leakage occurs continue with "GSE Passivation Procedure");;2;;;;;
 00:00;EGSE;Close HPV1;;2;;;;;