From 941706f08382d54bd23836177753f53461f0719e Mon Sep 17 00:00:00 2001
From: Finn Hansch <fhansch@stud.hs-bremen.de>
Date: Wed, 20 May 2020 09:29:53 +0200
Subject: [PATCH] fixed layout

---
 LaunchProcedure.csv | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/LaunchProcedure.csv b/LaunchProcedure.csv
index b0385e0..e3f8b45 100644
--- a/LaunchProcedure.csv
+++ b/LaunchProcedure.csv
@@ -17,18 +17,18 @@ vers.;v3.0;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
 144:35;EGSE;Confirm PID-VI is running;;1;;;;;
 144:35;EGSE;Rename PID-Logfile;;1;;;;02:00;
 142:35;MRL;Confirm working Personel is grounded;;1;;;;;
-Confirm all 8 Groundingbridges are inserted
+0;EGSL@MRL;Confirm all 8 Groundingbridges are inserted;;1;;;;;
 142:35;MRL;Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30;
-EGSE;Turn on EPS_BAT
-EGSE;Turn on EPS_EXT
-EGSE@MRL;Remove 7 Grounding Bridges and leave EPS_BAT inserted
-EGSE@MRL;Insert EPS_EXT Fuse in Power Supply Control Panel
-EGSE@MRL;Confirm green LED at EPS_EXT Fuse is on
-EGSE@MRL;Insert Main_Bus Fuse in Power Supply Control Panel
-EGSE@MRL;Confirm LED at Main_Bus Fuse is OFF. Else Pull fuse and insert all Grounding Bridges
-EGSE@MRL;Set remaining Fuses (except Payload Fuse) and check for green LED
-EGSE;Turn OFF EPS_BAT
-EGSE@MRL;Confirm Main bus LED is on.
+0;EGSE;Turn on EPS_BAT;;1;;;;;
+0;EGSE;Turn on EPS_EXT;;1;;;;;
+0;EGSE@MRL;Remove 7 Grounding Bridges and leave EPS_BAT inserted;;1;;;;;
+0;EGSE@MRL;Insert EPS_EXT Fuse in Power Supply Control Panel;;1;;;;;
+0;EGSE@MRL;Confirm green LED at EPS_EXT Fuse is on;;1;;;;;
+0;EGSE@MRL;Insert Main_Bus Fuse in Power Supply Control Panel;;1;;;;;
+0;EGSE@MRL;Confirm LED at Main_Bus Fuse is OFF. Else Pull fuse and insert all Grounding Bridges;;1;;;;;
+0;EGSE@MRL;Set remaining Fuses (except Payload Fuse) and check for green LED;;1;;;;;
+0;EGSE;Turn OFF EPS_BAT;;1;;;;;
+0;EGSE@MRL;Confirm Main bus LED is on.;;1;;;;;
 142:05;EGSE;Start EPS via EPS_ext;;1;;;;;
 140:05;OBDH;Clear SD-Card-using FileZilla FTP;;;;;;01:00;
 139:05;OBDH;Connect to sbRIO;;1;;;;;
@@ -36,8 +36,8 @@ EGSE@MRL;Confirm Main bus LED is on.
 139:05;MRL;Confirm 3 beeps at OBC1;;1;;;;;
 139:05;OBDH;Open RT_Sub_HMI;;1;;;;;
 139:05;OBDH;Confirm Main Chute button is disabled;;1;;;;;
-EGSE@MRL;Insert Payload Fuse
-EGSE@MRL;Confirm green LED at Payload Fuse is on
+0;EGSE@MRL;Insert Payload Fuse
+0;EGSE@MRL;Confirm green LED at Payload Fuse is on
 139:05;MRL;Confirm working Personel is grounded;;1;;;;01:00;
 138:05;MRL;Remove Pneumatic Line from Fueling arm;;1;;;;;
 138:05;MRL;Move Fueling arm to rocket;;1;;;;;
@@ -297,7 +297,7 @@ EGSE@MRL;Confirm green LED at Payload Fuse is on
 00:00;EGSE;Close HPV2;;2;;;;;
 00:00;EGSE;Close HPDV;;2;;;;;
 00:00;MRL;Go to Testrig, confirm HPPG2 0 Bar, else return to BlockHouse, then open ComTerm;;2;;;;;
-12960:00;MRL;Close N2 Bottle;;2;;;;;
+00:00;MRL;Close N2 Bottle;;2;;;;;
 00:00;MRL;Write down remaining Pressure of N2 Bottle;;2;;;;;
 00:00;MRL;Step back;;2;;;;;
 00:00;MRL;Check EPV manometer less than 6 bar;;2;;;;;