From fdc8038d977f34fa4f0bce3152a7062b85015741 Mon Sep 17 00:00:00 2001 From: Finn Hansch Date: Thu, 28 May 2020 12:45:03 +0200 Subject: [PATCH] inserted grounding before touching the rocket --- LaunchProcedure.csv | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/LaunchProcedure.csv b/LaunchProcedure.csv index 2817b8c..9710559 100644 --- a/LaunchProcedure.csv +++ b/LaunchProcedure.csv @@ -1,4 +1,4 @@ -vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; +vers.;v4.7;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 147:20;MCC;BEGIN SEQUENCE: Power on EGSE;Power on EGSE;1;;;;; 147:20;EGSE;Check CLD connection;;1;;;;; 147:20;EGSE;Switch ON CLD via Battery & check voltage (24 Volt);;1;;;;; @@ -16,12 +16,12 @@ vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 143:20;EGSE;Start RT_VI;;1;;;;; 143:20;EGSE;Confirm PID-VI is running;;1;;;;; 143:20;EGSE;Rename PID-Logfile;;1;;;;02:00; +141:20;MCC;BEGIN SEQUENCE: Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30; 141:20;MRL;Confirm working Personel is grounded;;1;;;;; 141:20;EGSL@MRL;Confirm all 8 Groundingbridges are inserted;;1;;;;; -141:20;MCC;BEGIN SEQUENCE: Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30; 140:50;EGSE;Turn on EPS_BAT;;1;;;;; 140:50;EGSE;Turn on EPS_EXT;;1;;;;; -140:50;EGSE@MRL;Remove 7 Grounding Bridges and leave EPS_BAT inserted;;1;;;;; +140:50;EGSE@MRL;Leave EPS_BAT inserted and remove the other 7 Grounding Bridges;;1;;;;; 140:50;EGSE@MRL;Insert EPS_EXT Fuse in Power Supply Control Panel;;1;;;;; 140:50;EGSE@MRL;Confirm green LED at EPS_EXT Fuse is on;;1;;;;; 140:50;EGSE@MRL;Insert Main_Bus Fuse in Power Supply Control Panel;;1;;;;; @@ -153,18 +153,23 @@ vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 101:10;MRL;Close MBV;;2;;;;00:30; 100:40;MRL;Safety is ensured;;2;;;;; 100:40;MCC;MiS to MRL;;1;;;;; -100:40;EGSE;Switch off N20 coupling;;1;;;;; -100:40;EGSE;Switch off He coupling;;1;;;;; +100:40;EGSE;Switch OFF N20 coupling;;1;;;;; +100:40;EGSE;Switch OFF He coupling;;1;;;;; +100:40;MRL;Confirm working Personel is grounded;;1;;;;01:00; 100:40;MRL;Release Pneumatic lines of couplings;;1;;;;00:20; -100:20;EGSE;Confirm Fueling arm is switched off;;1;;;;; +100:20;EGSE;Confirm Fueling arm is switched OFF;;1;;;;; 100:20;EGSE;Check OxOutPT and HPLPT 0 bar;;1;;;;; -100:20;MRL;Couple Helium coupling;;1;;;;00:30; +100:20;MRL;Couple He coupling;;1;;;;00:30; 99:50;MRL;Couple N2O coupling;;1;;;;00:30; +99:50;MRL;Confirm He coupling is connected properly;;1;;;;; +99:50;MRL;Confirm N2O coupling is connected properly;;1;;;;; 99:20;MRL;HOLD;HOLD;1;;;;; 99:20;EGSE/MRL;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10; 99:20;EGSE/MRL;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10; 99:20;MCC;CONTINUE AFTER HOLD;;;;;;; 99:20;MRL;BEGIN SEQUENCE: Arming Rocket Part 1;Arming Rocket Pt.1;1;;;;; +99:20;MRL;Confirm working Personel is grounded;;1;;;;01:00; +99:20;MRL;Confirm all spring retracted hatches are moving freely;;1;;;;; 98:50;MRL;Turn on GoPro Camera at end of Launch Rail;;1;;;;00:20; 99:20;MRL;Connect Ignition Umbilical;;1;;;;00:30; 98:30;MRL;Insert all EPS Bridges;;1;;;;03:00; @@ -222,7 +227,7 @@ vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 67:40;EGSE;Zero OxTank Mass;;3;;;;; 67:40;MCC;Write down Time;;3;;;;; 67:40;EGSE;Open OxV1;;3;;;;04:00; -63:40;OBDH;Open & Close RDV STEPWISE until N2O bottle empty or 25kg OxTankMass, keep temperatures RDVT and RDVET above 10°C and Check delta ROxTPT and OxInPT1;;3;;;;30:00:00; +63:40;OBDH;Open & Close RDV STEPWISE until N2O bottle empty or 25kg OxTankMass, keep temperatures RDVT and RDVET above 10°C and Check delta ROxTPT and OxInPT1;;3;;;;30:00; 33:40;EGSE;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10; 33:40;EGSE;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10; 33:40;EGSE;Close OxV1;;3;;;;00:10; @@ -249,9 +254,9 @@ vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 8:15;OPS;Align MRL to Launch Trajectory;;3;;;;; 8:15;MCC;Turn audio volume down;;3;;;;; 8:15;MCC;Turn off Confirm delay;;3;;;;; -8:15;MCC;Confirm MRL adjustment with OPS;;3;;;;; 8:15;ALL;Talk through Launch Sequence;;3;;;;; -8:15;AVC;Start Video Recording in Block House;;3;;;;; +8:15;MCC;Confirm MRL adjustment with OPS;;3;;;;; +8:15;AVC;Start Video recording in Block House;;3;;;;; 8:15;MCC;CONTINUE AFTER HOLD;;;;;;; 8:15;MCC;BEGIN Switching to Internal Power Sequence;Switch to Internal Power;3;;;;; 8:15;EGSE;Switch to internal Power;;3;;;;00:20; @@ -297,6 +302,7 @@ vers.;v4.5;Launch Procedure;;0;MRL;MCC;RdHill;Time per step; 0:00;OBDH;T+310: Verify Main Chute Deployed and RDV Open (Main);;4;;;;; 0:00;OBDH;T+600: Verify (Landed);;4;;;;; 0:00;MCC;BEGIN SEQUENCE: PASSIVATION (PHASE YELLOW) (Write down Time);Passivation;2;;;;; +68:40;MCC;Announce BEGIN of Radio Silence;;3;;;;; 0:00;MCC;Turn audio volume up;;2;;;;; 0:00;TMTC;Check ROxTPT & RHPPT 1 Bar, if more: Open & Close STEPWISE RDV;;2;;;;; 0:00;MRL;Go to Testrig, Close N2O Bottle 1 & N2O Bottle 2 then RETURN to Block House;;2;;;;;