14 KiB

Raw Blame History

Configuration

Here you would find a long description, maybe the description in example file are enough for you.

The config file for Yanic written in "Tom's Obvious, Minimal Language." syntax. (if you need somethink multiple times, checkout out the array of table section)

[respondd]

{% method %} Group for configuration of respondd request. {% sample lang="toml" %}

[respondd]
enable           = true
# synchronize    = "1m"
collect_interval = "1m"
interfaces       = ["br-ffhb"]
sites            = ["ffhb"]
#port            = 10001

{% endmethod %}

enable

{% method %} Enable request and collection of data per respondd requests {% sample lang="toml" %}

enable = true

{% endmethod %}

synchronize

{% method %} Delay startup until a multiple of the period since zero time {% sample lang="toml" %}

synchronize      = "1m"

{% endmethod %}

collect_interval

{% method %} How often send request per respondd.

It will send UDP packets with multicast group ff02::2:1001 and port 1001. If a node does not answer after the half time, it will request with the last know address under the port 1001. {% sample lang="toml" %}

collect_interval = "1m"

{% endmethod %}

interfaces

{% method %} Interface that has an IP in your mesh network {% sample lang="toml" %}

interfaces       = ["br-ffhb"]

{% endmethod %}

sites

{% method %} List of sites to save stats for (empty for global only) {% sample lang="toml" %}

sites            = ["ffhb"]

{% endmethod %}

port

{% method %} Define a port to listen and send the respondd packages. If not set or set to 0 the kernel will use a random free port at its own. {% sample lang="toml" %}

port              = 10001

{% endmethod %}

[webserver]

{% method %} Yanic has a little build-in webserver, which statically serves a directory. This is useful for testing purposes or for a little standalone installation. {% sample lang="toml" %}

[webserver]
enable  = false
bind    = "127.0.0.1:8080"
webroot = "/var/www/html/meshviewer"

{% endmethod %}

enable

{% method %} Enable to start the built-in webserver of Yanic {% sample lang="toml" %}

enable  = false

{% endmethod %}

bind

{% method %} On which ip address and port listen the webserver {% sample lang="toml" %}

bind    = "127.0.0.1:8080"

{% endmethod %}

webroot

{% method %} The path to a folder, which files are published on this webserver. {% sample lang="toml" %}

webroot = "/var/www/html/meshviewer"

{% endmethod %}

[nodes]

{% method %} {% sample lang="toml" %}

[nodes]
state_path     = "/var/lib/yanic/state.json"
prune_after    = "7d"
save_interval  = "5s"
offline_after  = "10m"

{% endmethod %}

state_path

{% method %} A json file to cache all data collected directly from respondd. {% sample lang="toml" %}

state_path     = "/var/lib/yanic/state.json"

{% endmethod %}

prune_after

{% method %} Prune data in RAM, cache-file and output json files (i.e. nodes.json) that were inactive for longer than. {% sample lang="toml" %}

prune_after = "7d"

{% endmethod %}

save_interval

{% method %} Export nodes and graph periodically. {% sample lang="toml" %}

save_interval = "5s"

{% endmethod %}

offline_after

{% method %} Set node to offline if not seen within this period. {% sample lang="toml" %}

offline_after = "10m"

{% endmethod %}

nodes.output.example

{% method %} This example block shows all option which is useable for every following output type. Every output type has his own configuration under nodes.output. It is possible to have multiple output for one type of output, just add this group again with new parameters (see toml array of table). {% sample lang="toml" %}

[[nodes.output.example]]
enable = true
[nodes.output.example.filter]
no_owner  = true
blacklist = ["00112233445566", "1337f0badead"]
sites = ["ffhb"]
has_location = true
[nodes.output.example.filter.in_area]
latitude_min  = 34.30
latitude_max  = 71.85
longitude_min = -24.96
longitude_max = 39.72

{% endmethod %}

enable

{% method %} Each output format has its own config block and needs to be enabled by adding: {% sample lang="toml" %}

enable = true

{% endmethod %}

[nodes.output.example.filter]

{% method %} For each output format there can be set different filters {% sample lang="toml" %}

[nodes.output.example.filter]
no_owner  = true
blacklist = ["00112233445566", "1337f0badead"]
sites = ["ffhb"]
has_location = true
[nodes.output.example.filter.in_area]
latitude_min  = 34.30
latitude_max  = 71.85
longitude_min = -24.96
longitude_max = 39.72

{% endmethod %}

no_owner

{% method %} Set to false, if you want the json files to contain the owner information

WARNING: if it is not set, it will publish contact information of other persons.

{% sample lang="toml" %}

no_owner = true

{% endmethod %}

blacklist

{% method %} List of nodeids of nodes that should be filtered out, so they won't appear in output {% sample lang="toml" %}

blacklist = ["00112233445566", "1337f0badead"]

{% endmethod %}

sites

{% method %} List of site_codes of nodes that should be included in output {% sample lang="toml" %}

sites = ["ffhb"]

{% endmethod %}

has_location

{% method %} set has_location to true if you want to include only nodes that have geo-coordinates set (setting this to false has no sensible effect, unless you'd want to hide nodes that have coordinates) {% sample lang="toml" %}

has_location = true

{% endmethod %}

[nodes.output.example.filter.in_area]

{% method %} nodes outside this area are not shown on the map but are still listed as a node without coordinates {% sample lang="toml" %}

latitude_min = 34.30
latitude_max = 71.85
longitude_min = -24.96
longitude_max = 39.72

{% endmethod %}

nodes.output.meshviewer-ffrgb

{% method %} The new json file format for the meshviewer developed in Regensburg.

{% sample lang="toml" %}

[[nodes.output.meshviewer-ffrgb]]
enable   = true
path     = "/var/www/html/meshviewer/data/meshviewer.json"
#[nodes.output.meshviewer-ffrgb.filter]
#no_owner = false
#blacklist = ["00112233445566", "1337f0badead"]
#has_location = true

#[nodes.output.meshviewer-ffrgb.filter.in_area]
#latitude_min = 34.30
#latitude_max = 71.85
#longitude_min = -24.96
#longitude_max = 39.72

{% endmethod %}

path

{% method %} The path, where to store meshviewer.json {% sample lang="toml" %}

path     = "/var/www/html/meshviewer/data/meshviewer.json"

{% endmethod %}

nodes.output.meshviewer

{% method %} {% sample lang="toml" %}

[[nodes.output.meshviewer]]
enable         = false
version        = 2
nodes_path     = "/var/www/html/meshviewer/data/nodes.json"
graph_path     = "/var/www/html/meshviewer/data/graph.json"

{% endmethod %}

version

{% method %} The structure version of the output which should be generated (i.e. nodes.json)

version 1 is accepted by the legacy meshviewer (which is the master branch)
https://github.com/ffnord/meshviewer/tree/master
version 2 is accepted by the new version of meshviewer (which are in legacy develop branch or newer)
https://github.com/ffnord/meshviewer/tree/dev
https://github.com/ffrgb/meshviewer/tree/develop

{% sample lang="toml" %}

version = 2

{% endmethod %}

nodes_path

{% method %} The path, where to store nodes.json (supports version 1 and two, see nodes_version) {% sample lang="toml" %}

nodes_path = "/var/www/html/meshviewer/data/nodes.json"

{% endmethod %}

graph_path

{% method %} The path, where to store graph.json (only version 1) {% sample lang="toml" %}

graph_path = "/var/www/html/meshviewer/data/graph.json"

{% endmethod %}

nodes.output.nodelist

{% method %} The nodelist output is a minimal output with current state of collected data. Should be preferred to use it on the ffapi for the freifunk-karte.de {% sample lang="toml" %}

[[nodes.output.nodelist]]
enable   = false
path     = "/var/www/html/meshviewer/data/nodelist.json"
#[nodes.output.nodelist.filter]
#no_owner = false

{% endmethod %}

path

{% method %} The path, where to store nodelist.json {% sample lang="toml" %}

path     = "/var/www/html/meshviewer/data/nodelist.json"

{% endmethod %}

[database]

{% method %} The database organize all database types. For all database types the is a internal job, which reset data for nodes (global statistics are still stored). (We have for privacy policy to store node data for maximum seven days.) {% sample lang="toml" %}

delete_after = "7d"
delete_interval = "1h"

{% endmethod %}

delete_after

{% method %} This will send delete commands to the database to prune data which is older than: {% sample lang="toml" %}

delete_after = "7d"

{% endmethod %}

delete_interval

{% method %} How often run the delete commands. {% sample lang="toml" %}

delete_interval = "1h"

{% endmethod %}

database.connection.example

{% method %} This example block shows all option which is useable for every following database type. Every database type has his own configuration under database.connection. It is possible to have multiple connections for one type of database, just add this group again with new parameters (see toml array of table). {% sample lang="toml" %}

[[database.connection.example]]
enable = true

{% endmethod %}

enable

{% method %} Each database-connection has its own config block and needs to be enabled by adding: {% sample lang="toml" %}

enable = true

{% endmethod %}

database.connection.influxdb

{% method %} Save collected data to InfluxDB. There are would be the following measurements:

node: store node specific data i.e. clients memory, airtime
global: store global data, i.e. count of clients and nodes
firmware: store the count of nodes tagged with firmware
model: store the count of nodes tagged with hardware model {% sample lang="toml" %}

enable   = false
address  = "http://localhost:8086"
database = "ffhb"
username = ""
password = ""
[database.connection.influxdb.tags]
tagname1 = "tagvalue 1"
system   = "productive"
site     = "ffhb"

{% endmethod %}

address

{% method %} Address to connect on InfluxDB server. {% sample lang="toml" %}

address  = "http://localhost:8086"

{% endmethod %}

database

{% method %} Database on which the measurement should be stored. {% sample lang="toml" %}

database = "ffhb"

{% endmethod %}

username

{% method %} Username to authenticate on InfluxDB {% sample lang="toml" %}

username = ""

{% endmethod %}

password

{% method %} Password to authenticate on InfluxDB. {% sample lang="toml" %}

password = ""

{% endmethod %}

[database.connection.influxdb.tags]

{% method %} You could set manuelle tags with inserting into a influxdb. Useful if you want to identify the yanic instance when you use multiple own on the same influxdb (e.g. multisites).

Warning: Tags used by Yanic would override the tags from this config (e.g. nodeid, hostname, owner, model, firmware_base, firmware_release, frequency11g, frequency11a). {% sample lang="toml" %}

tagname1 = "tagvalue 1s"
# some useful e.g.:
system   = "productive"
site     = "ffhb"

{% endmethod %}

database.connection.graphite

{% method %} Save collected data to a graphite database. {% sample lang="toml" %}

enable   = false
address  = "localhost:2003"
prefix   = "freifunk"

{% endmethod %}

address

{% method %} Address to connect on graphite server. {% sample lang="toml" %}

address = "localhost:2003"

{% endmethod %}

prefix

{% method %} Graphite is replacing every "." in the metric name with a slash "/" and uses that for the file system hierarchy it generates. it is recommended to at least move the metrics out of the root namespace (that would be the empty prefix). If you only intend to run one community and only freifunk on your graphite node then the prefix can be set to anything (including the empty string) since you probably wont care much about "polluting" the namespace. {% sample lang="toml" %}

prefix = "freifunk"

{% endmethod %}

database.connection.respondd

{% method %} Forward collected respondd package to a address (e.g. to another respondd collector like a central yanic instance or hopglass) {% sample lang="toml" %}

enable   = false
type     = "udp6"
address  = "stats.bremen.freifunk.net:11001"

{% endmethod %}

type

{% method %} Type of network to create a connection.

Known networks are "tcp", "tcp4" (IPv4-only), "tcp6" (IPv6-only), "udp", "udp4" (IPv4-only), "udp6" (IPv6-only), "ip", "ip4" (IPv4-only), "ip6" (IPv6-only), "unix", "unixgram" and "unixpacket". {% sample lang="toml" %}

type     = "udp6"

{% endmethod %}

address

{% method %} Destination address to connect/send respondd package. {% sample lang="toml" %}

address  = "stats.bremen.freifunk.net:11001"

{% endmethod %}

database.connection.logging

{% method %} This database type is just for, debugging without a real database connection. A example for other developers for new database types. {% sample lang="toml" %}

enable   = false
path     = "/var/log/yanic.log"

{% endmethod %}

path

{% method %} Path to file where to store some examples with every line. {% sample lang="toml" %}

path     = "/var/log/yanic.log"

{% endmethod %}

14 KiB Raw Blame History

Configuration

[respondd]

enable

synchronize

collect_interval

interfaces

sites

port

[webserver]

enable

bind

webroot

[nodes]

state_path

prune_after

save_interval

offline_after

enable

[nodes.output.example.filter]

no_owner

blacklist

sites

has_location

[nodes.output.example.filter.in_area]

path

version

nodes_path

graph_path

path

[database]

delete_after

delete_interval

enable

address

database

username

password

[database.connection.influxdb.tags]

address

prefix

type

address

path

14 KiB

Raw Blame History