fhansch
/
procedure
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

last changes in feb

This commit is contained in:
Finn 2020-05-20 09:25:51 +02:00
parent 6599484559
commit bdd5737aea
1 changed files with 23 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
LaunchProcedure.csv
View File

@ -1,8 +1,8 @@
vers.;v3.0;Launch Procedure;;0;MRL;MCC;Radar Hill;Time per step;
vers.;v3.0;Launch Procedure;;0;MRL;MCC;RdHill;Time per step;
147:35;EGSE;BEGIN of Power on EGSE Sequence;Power on EGSE;1;;;;;
148:35;EGSE;Check CLD connection;;1;;;;;
148:35;EGSE;Switch on CLD via Battery & check voltage (24 Volt);;1;;;;;
148:35;EGSE;Switch on the primary and secondary supply switches on the Control Panel;;1;;;;01:00;
147:35;EGSE;Power on EGSE;Power on EGSE;1;;;;;
147:35;EGSE@MRL;Switch on Sup_24V_20A & check voltage (ca. 27,2 Volt);;1;;;;;
147:35;EGSE@MRL;Switch on Sup_24V_10A & check voltage (ca. 27,2 Volt);;1;;;;;
147:35;EGSE@MRL;Switch on Sup_12V_10A & check voltage (ca. 13,8 Volt);;1;;;;;
@ -17,37 +17,51 @@ vers.;v3.0;Launch Procedure;;0;MRL;MCC;Radar Hill;Time per step;
144:35;EGSE;Confirm PID-VI is running;;1;;;;;
144:35;EGSE;Rename PID-Logfile;;1;;;;02:00;
142:35;MRL;Confirm working Personel is grounded;;1;;;;;
Confirm all 8 Groundingbridges are inserted
142:35;MRL;Connect Data Umbilical;Connect Data Umbilical;1;;;;00:30;
EGSE;Turn on EPS_BAT
EGSE;Turn on EPS_EXT
EGSE@MRL;Remove 7 Grounding Bridges and leave EPS_BAT inserted
EGSE@MRL;Insert EPS_EXT Fuse in Power Supply Control Panel
EGSE@MRL;Confirm green LED at EPS_EXT Fuse is on
EGSE@MRL;Insert Main_Bus Fuse in Power Supply Control Panel
EGSE@MRL;Confirm LED at Main_Bus Fuse is OFF. Else Pull fuse and insert all Grounding Bridges
EGSE@MRL;Set remaining Fuses (except Payload Fuse) and check for green LED
EGSE;Turn OFF EPS_BAT
EGSE@MRL;Confirm Main bus LED is on.
142:05;EGSE;Start EPS via EPS_ext;;1;;;;;
142:05;EGSE@MRL;Set Fuse in Power supply control panel;;1;;;;;
142:05;EGSE@MRL;Insert EPS_bat Bridge;;1;;;;02:00;
140:05;OBDH;Clear SD-Card-using FileZilla FTP;;;;;;01:00;
139:05;OBDH;Connect to sbRIO;;1;;;;;
139:05;OBDH;Start RT_Main;;1;;;;;
139:05;MRL;Confirm 3 beeps at OBC1;;1;;;;;
139:05;OBDH;Open RT_Sub_HMI;;1;;;;;
139:05;OBDH;Confirm Main Chute button is disabled;;1;;;;;
EGSE@MRL;Insert Payload Fuse
EGSE@MRL;Confirm green LED at Payload Fuse is on
139:05;MRL;Confirm working Personel is grounded;;1;;;;01:00;
138:05;MRL;Remove Pneumatic Line from Fueling arm;;1;;;;;
138:05;MRL;Move Fueling arm to rocket;;1;;;;;
138:05;MRL;Couple Helium coupling;;1;;;;;
138:05;MRL;Couple N2O coupling;;1;;;;;
138:05;MRL;Attach Pneumatic Line to Fueling arm;;1;;;;03:00;
138:05;MRL;Reattach Pneumatic Line to Fueling arm;;1;;;;03:00;
135:05;MRL;Confirm that Ignition Umbilical is disconnected;;1;;;;;
135:05;EGSE;BEGIN EGSE Valve and actuator check Sequence;Valve check;1;;;;;
135:05;MCC;Check if video recording is enabled @ MCC;;1;;;;00:10;
134:55;OBDH;Check EPS hardware;;1;;;;00:10;
134:55;OBDH;Check EPS hardware Voltages;;1;;;;00:10;
134:45;EGSE;Start PID data recording;;1;;;;00:10;
134:35;EGSE;Check OxOutPT 0 Bar;;1;;;;00:10;
134:25;MRL;Close HPNV;;1;;;;00:10;
134:15;EGSE/MRL;Switch OxDV to closed & check if magnetic valve LED is on;;1;;;;00:10;
134:05;EGSE/MRL;Switch HPDV to closed & check if magnetic valve LED is on;;1;;;;00:10;
133:55;EGSE/MRL;Check warning lamp ;;1;;;;00:10;
133:55;EGSE/MRL;Check warning lamp on HPSM;;1;;;;00:10;
133:45;MRL;Remove loose equipment;;1;;;;03:00;
130:45;EGSE;Activate Heizi;;1;;;;00:10;
130:35;EGSE;Activate N2O_Heater 1;;1;;;;00:10;
130:25;EGSE;Activate N2O_Heater 2;;1;;;;00:10;
130:15;EGSE;Activate HE_Heater;;1;;;;00:10;
128:15;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;00:10;
128:35;EGSE/MRL;Verify Bottle Temperatures @ OxT1, OxT2, HPT2;;1;;;;00:10;
128:25;EGSE/MRL;Verify Water Temperatures @ Ox@T1, OxWT2, HPWT2;;1;;;;00:10;
128:05;EGSE;Deactivate Heizi;;1;;;;00:10;
130:05;EGSE;Check OxV1 (CLD & RT_VI);;1;;;;00:10;
129:55;EGSE;Check OxV2 (CLD & RT_VI);;1;;;;00:10;
129:45;EGSE;Check MPV3 (CLD & RT_VI);;1;;;;00:10;
@ -57,17 +71,13 @@ vers.;v3.0;Launch Procedure;;0;MRL;MCC;Radar Hill;Time per step;
129:05;EGSE;Check RDV (CLD & RT_VI);;1;;;;00:10;
128:55;EGSE;Check RMOxOV (CLD & RT_VI);;1;;;;00:10;
128:45;EGSE;Check RMOxSV (CLD & RT_VI);;1;;;;00:10;
128:35;EGSE/MRL;Verify Bottle Temperatures @ OxT1 OxT2 HPT2;;1;;;;00:10;
128:25;EGSE/MRL;Verify Water Temperatures @ Ox@T1 OxWT2 HPWT2;;1;;;;00:10;
128:15;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;00:10;
128:05;EGSE;Deactivate Heizi;;1;;;;00:10;
127:55;OBDH;Activate Heizi;;1;;;;00:10;
126:55;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;01:00;
127:45;OBDH;Check RDV;;1;;;;00:10;
127:35;OBDH;Check RNCEV;;1;;;;00:10;
127:25;OBDH;Check RMOxOV;;1;;;;00:10;
127:15;OBDH;Check RMOxSV;;1;;;;00:10;
127:05;OBDH;Confirm RNCEV is disabled;;1;;;;00:10;
126:55;OBDH;Verify Heizi @ RDVT & RDVET;;1;;;;00:10;
126:45;OBDH/TMTC;Check RF451-Link;;1;;;;00:20;
126:25;TMTC;Check GPS-lock;;3;;;;00:20;
126:05;TMTC;Check Telemega-Link;;1;;;;00:20;

Can't render this file because it has a wrong number of fields in line 20.