procedure/AbortProcedure.csv

1	vers.	v4.29	Abort Procedure		3	mrl	mcc	rdh	time
2	0:00	MCC	BEGIN SEQUENCE: Prepare Launch Abort	Prepare Launch Abort	3
3	0:00	MCC	Inform OPS of Launch Abort		3
4	0:00	EGSE	Confirm all valve switches are in OFF position (Except OxDV & HPDV)		3
5	0:00	OBDH	Confirm all valve switches are in OFF position (Except RMOxSV)		3
6	0:00	MCC	Turn audio volume up		3
7	0:00	MCC	BEGIN SEQUENCE: Defueling Rocket	Defueling	3
8	0:00	OBDH	Activate Heizi		3
9	0:00	EGSE	Open & Close OxDV STEPWISE until OxOutPT 0 Bar		3
10	0:00	EGSE	Open OxDV		3
11	0:00	EGSE	Open MPV3		3
12	0:00	EGSE	Confirm OxOutPT 0 bar		3
13	0:00	EGSE	Close MPV3		3
14	0:00	EGSE	Close OxDV		3
15	0:00	EGSE	Open HPDV		3
16	0:00	EGSE	Confirm HPLPT 0 bar		3
17	0:00	EGSE	Close HPDV		3
18	0:00	OBDH	Confirm ROxTPT & RHPPT 1 Bar, if more: Open & Close stepwise RDV		3
19	0:00	OBDH	Deactivate Heizi		3
20	0:00	ALL	Wait for Launchpad to be clear of N2O fumes depending on OxMass before Defueling		3
21	0:00	MCC	BEGIN SEQUENCE: Ground support equipment passivation	GSE Passivation	3
22	0:00	EGSE	Turn ON EPS_BAT (Rocket OFF)		2
23	0:00	MCC	Announce BEGIN of Radio Silence		3
24	0:00	MRL	Go to MRL, THEN...		2
25	0:00	MRL	Remove HP section maintenance cover, THEN...		2
26	0:00	MRL	Open RMDV & Step Back, Wait until NCE-Tank is pressureless, THEN...		2
27	0:00	MRL	Close N2O Bottle 1 & N2O Bottle 2, THEN...		2
28	0:00	MRL	RETURN to Block House		2
29	0:00	EGSE	Open OxDV		2
30	0:00	EGSE	Open OxV1		2
31	0:00	EGSE	Confirm OxInPT1 & OxOutPT 0 Bar		2
32	0:00	EGSE	Close OxV1		2
33	0:00	EGSE	Open OxV2		2
34	0:00	EGSE	Confirm OxInPT2 & OxOutPT 0 Bar		2
35	0:00	EGSE	Close OxV2		2
36	0:00	EGSE	Close OxDV		2
37	0:00	MRL	Go to MRL, confirm OxInPG1 & OxInPG2 0 Bar, else RETURN to Block House, THEN...		2
38	0:00	MRL	Close He Bottle 2, THEN...		2
39	0:00	MRL	Write down remaining Pressure of He Bottle 2, THEN...		2
40	0:00	MRL	Return to Block House		2
41	0:00	EGSE	Open HPDV		2
42	0:00	EGSE	Open HPV2		2
43	0:00	EGSE	Confirm pressure HPLPT & HPPT2 0 Bar		2
44	0:00	EGSE	Close HPV2		2
45	0:00	EGSE	Close HPDV		2
46	0:00	MRL	Go to Testrig, confirm HPPG2 0 Bar, else return to Block House, THEN...		2
47	0:00	MRL	Close He Bottle 1, THEN ...		2
48	0:00	MRL	Open ComTerm		2
49	8:15	MCC	Turn ON ComTerm step delay		2
50	0:00	MCC/MRL	Write down remaining Pressure of He Bottle 1		2
51	0:00	MRL	Step back		2
52	0:00	EGSE	Open HPDV		2
53	0:00	EGSE	Open HPV1		2
54	0:00	EGSE	Confirm pressure HPLPT & HPPT1 0 Bar		2
55	0:00	EGSE	Close HPV1		2
56	0:00	EGSE	Close HPDV		2
57	0:00	EGSE	Pressure Check		2
58	0:00	MRL	Open MBV		2
59	0:00	EGSE/ MRL	Check and compare pressure HPPT1 with HPPG1		2
60	0:00	MRL	Close MBV		2
61	0:00	MRL	Take out Bridges B1 & B2 from EGSE		2
62	0:00	MRL	Disconnect Ignition Umbilical		2				00:30
63	0:00	MRL	Safety is ensured		2
64	0:00	MCC	Confirm to OPS that Safety is ensured		1
65	0:00	MCC	BEGIN SEQUENCE: Data collection	Data collection	1
66	0:00	AVC	Turn off GoPro & Camcorder & Stop Block House Video recording		1
67	0:00	EGSE	Copy PID.vi.tdms & save to new name		1
68	0:00	EGSE	Wait for buffer storage process to be finished		1
69	0:00	EGSE	save data files from cRio to PC		1
70	0:00	WIND	Save data on external HDD		1
71	0:00	TMTC	Stop TMTC Vi and save data on external HDD		1
72	0:00	AVC	End audio recording		1
73	0:00	MCC	Stop ComTerm and save logfile to external HDD, THEN...		1
74	0:00	MCC	Restart ComTerm VI		1
75	0:00	AVC	Save video & audio data on external HDD		1
76	0:00	MCC	END OF PROCEDURE	END	1