XMPP, like email, is a federated protocol, which means that there is not one company you can create an *official XMPP account* with. Instead there are hundreds, or even thousands, of providers out there. One of those providers is our very own [chat.sum7.eu](https://chat.sum7.eu). If you don’t like to use *chat.sum7.eu* use a web search engine of your choice to find another provider. Or maybe your university has one. Or you can run your own. Or ask a friend to run one. Once you've found one, you can use Conversations to create an account. Just select *register new account* on server within the create account dialog.
As of 2019 we recommend you use [ejabberd](https://ejabberd.im). The default configuration file already enables everything you need to pass the [Conversations Compliance Suite](https://compliance.conversations.im). Make sure your Linux distribution ships a fairly recent version.
With a little bit of effort [Prosody](https://prosody.im) can be configured to support all necessary extensions as well. However you will have to rely on so called [Community Modules](https://modules.prosody.im/) of varying quality. Prosody can be interesting to people who like to modify their server and create / prototype own modules.
Performance wise - for small deployments - both ejabberd and Prosody should be fine.
Some Bind failures are transient and resolve themselves after a reconnect.
When trying to connect to OpenFire the bind failure can be a permanent problem when the domain part of the Jabber ID entered in Conversations doesn’t match the domain the OpenFire server feels responsible for. For example OpenFire is configured to use the domain `a.tld` but the Jabber ID entered is `user@b.tld` where `b.tld` also points to the same host. During bind OpenFire tries to reassign the Jabber to `user@a.tld`. Conversations doesn’t like that.
Note: This is kind of a weird quirk in OpenFire. Most other servers would just throw a 'Server not responsible for domain' error instead of attempting to reassign the Jabber ID.
Maybe you attempted to use the Jabber ID `test@b.tld` because `a.tld` doesn’t point to the correct host. In that case you might have to enable the extended connection settings in the expert settings of Conversations and set a host name.
### I get 'Stream opening error'. What does that mean?
In most cases this error is caused by ejabberd advertising support for TLSv1.3 but not properly supporting it. This can happen if the openssl version on the server already supports TLSv1.3 but the fast\_tls wrapper library used by ejabberd not (properly) support it. Upgrading fast\_tls and ejabberd or - theoretically - downgrading openssl should fix the issue. A work around is to explicity disable TLSv1.3 support in the ejabberd configuration. More information can be found on [this issue on the ejabberd issue tracker](https://github.com/processone/ejabberd/issues/2614).
Starting with Conversations 2.3.6 Conversations releases distributed over the Google Play Store will display a permanent notification if you are running it on Android 8 and above. This is a rule that it is essentially enforced by the Google Play Store. (You won’t have the problem of a *forced* foreground notification if you are getting your app from F-Droid.)
**The battery consumption and the entire behaviour of Conversations will remain the same (as good or as bad as it was before). Why is Google doing this to you? We have no idea.**
The foreground notification is still controlled over the expert settings within Conversations as it always has been. Whether or not you need to enable it depends on how aggressive the non-standard 'power saving' features are that your phone vendor has built into the operating system.
Long press the permanent notification and disable that particular type of notification by moving the slider to the left. This will make the notification disappear but create another notification (this time created by the operating system itself.) that will complain about Conversations (and other apps) using battery. Starting with Android 8.1 you can disable that notification again with the same method described above.
Long press the permanent notification and press the info `(i)` button to get into the App info screen. In that screen touch the 'Notification' entry. In the next screen remove the checkbox for the 'Foreground service' entry.
You need to be running the Play Store version of Conversations and your server needs to support push notifications.¹ Because *Google’s Firebase Cloud Messaging (FCM)* are tied with an API key to a specific app your server can not initiate the push message directly. Instead your server will send the push notification to the [Conversations App server](https://github.com/iNPUTmice/p2) (operated by us) which then acts as a proxy and initiates the push message for you. The push message sent from our App server through FCM doesn’t contain any personal information. It is just an empty message which will wake up your device and tell Conversations to reconnect to your server. The information sent from your server to our App server depends on the configuration of your server but can be limited to your account name. (In any case the Conversations App server won't redirect any information through FCM even if your server sends this information.)
In summary Google will never get hold of any personal information besides that *something* happened. (Which doesn’t even have to be a message but can be some automated event as well.) We - as the operator of the App server - will just get hold of your account name (without being able to tie this to your specific device).
If you don’t want this simply pick a server which does not offer Push Notifications or build Conversations yourself without support for push notifications. (This is available via a gradle build flavor.) Non-play store source of Conversations like the Amazon App store will also offer a version without push notifications. Conversations will just work as before and maintain its own TCP connection in the background.
You can find a detailed description of how your server, the app server and FCM are interacting with each other in the [README](https://github.com/iNPUTmice/p2/blob/master/README.md) of the Conversations App Server.
¹ If you use the Play Store version you do **not** need to run your own app server. Your server only needs to support the server side of [XEP-0357: Push Notifications](http://xmpp.org/extensions/xep-0357.html) and [XEP-0198: Stream Management](https://xmpp.org/extensions/xep-0198.html). The prosody server modules are called *mod_cloud_notify* and *mod_smacks*. The ejabberd server modules are called *mod_push* and *mod_stream_mgmt*.
FCM (Google Push) allows an app to wake up from *Doze* which is (as the name suggests) a hibernation feature of the Android operating system that cuts the network connection and also reduces the number of times the app is allowed to wake up (to ping the server for example). The app can ask to be excluded from doze. Non push variants of the app (from F-Droid or if the server doesn’t support it) will do this on first start up. So if you get exemption from *Doze*, or if you get regular push events sent to you, Doze should not pose a threat to Conversatons working properly. But even with *Doze* the app is still open in the background (kept in memory); it is just limited in the actions it can do. Conversations needs to stay in memory to hold certain session state (online status of contacts, join status of group chats, …). However with Android 8 Google changed all of this again and now an App that wants to stay in memory needs to have a foreground service which is visible to the user via the annoying notification. But why does Conversations need to hold that state? XMPP is a stateful protocol that has a lot of per-session information; packets need to be counted, presence information needs to be held, some features like Message Carbons get activated once per session, MAM catchup happens once, service discovery happens only once; the list goes on. When Conversations was created in early 2014 none of this was a problem because apps were just allowed to stay in memory. Basically every XMPP client out there holds that information in memory because it would be a lot more complicated trying to persist it to disk. An entire rewrite of Conversations in the year 2019 would attempt to do that and would probably succeed however it would require exactly that; a complete rewrite which is not feasible right now. That’s by the way also the reason why it is difficult to write an XMPP client on iOS. Or more broadly put this is also the reason why other protocols are designed as or migrated to stateless protocols (often based on HTTP); take for example the migration of IMAP to [JMAP](https://jmap.io/).
#### How do I backup / move Conversations to a new device?
On the one hand Conversations supports Message Archive Management to keep a server side history of your messages so when migrating to a new device that device can display your entire history. However that does not work if you enable OMEMO due to its forward secrecy. (Read [The State of Mobile XMPP in 2016](https://gultsch.de/xmpp_2016.html) especially the section on encryption.)
As of version 2.4.0 an integrated Backup & Restore function will help with this, go to Settings and you’ll find a setting called Create backup. A notification will pop-up during the creation process that will announce you when it's ready. After the files, one for each account, are created, you can move the **Conversations** folder *(if you want your old media files too)* or only the **Conversations/Backup** folder *(for OMEMO keys and history only)* to your new device (or to a storage place) where a freshly installed Conversations can restore each account. Don't forget to enable the accounts after a succesful restore.
This backup method will include your OMEMO keys. Due to forward secrecy you will not be able to recover messages sent and received between creating the backup and restoring it. If you have a server side archive (MAM) those messages will be retrieved but displayed as *unable to decrypt*. For technical reasons you might also lose the first message you either sent or receive after the restore; for each conversation you have. This message will then also show up as *unable to decrypt*, but this will automatically recover itself as long as both participants are on Conversations 2.3.11+. Note that this doesn’t happen if you just transfer to a new phone and no messages have been exchanged between backup and restore.
In the vast, vast majority of cases you won’t have to manually delete OMEMO keys or do anything like that. Conversations only introduced the offical backup feature in 2.4.0 after making sure the *OMEMO self healing* mechanism introduced in 2.3.11 works fine.
**WARNING**: Be sure to know your accounts passwords or find ways to reset them **before** doing the backup as the files are encrypted using those passwords and the Restore process will ask for them.
**WARNING**: Do not use the restore backup feature in an attempt to clone (run simultaneously) an installation. Restoring a backup is only meant for migrations or in case you’ve lost the original device.
* OMEMO works even when a contact is offline, and works with multiple devices. It also allows asynchronous file-transfer when the server has [HTTP File Upload](http://xmpp.org/extensions/xep-0363.html). However, OMEMO not widely support and is currently implemented only [by a handful of clients](https://omemo.top).
* OpenPGP (XEP-0027) is a very old encryption method that has some advantages over OMEMO but should only be used by people who know what they are doing.
OMEMO is only available in 1:1 chats and private (members-only, non-anonymous) group chats. Encrypting public group chats makes little to no sense since anyone (including a hypothetical attacker) can join and a user couldn’t possibily verify all participants anyway. Furthermore for a lot of public group chat it is desirable to give new comers access to the full history.
#### OMEMO doesn’t work. I get a 'Something went wrong' message in the 'Trust OMEMO Fingerprints' screen.
OMEMO has two requirements: Your server and the server of your contact need to support PEP. Both of you can verify that individually by opening your account details and selecting ```Server info``` from the menu. The appearing table should list PEP as available. The second requirement is that the initial sender needs to have access to the published key material. This can either be achieved by having mutual presence subscription (you can verify that by opening the contact details and see if both check boxes *Send presence updates* and *Receive presence updates* are checked) or by using a server that makes the public key material accessible to anyone. In the [Compliance Tester](https://compliance.conversations.im) this is indicated by the 'OMEMO' feature. Since it is very common that the first messages are exchanged *before* adding each other to the contact list it is desirable to use servers that have 'OMEMO support'.
OMEMO encryption works only in private (members only) conferences that are non-anonymous. Non-anonymous (being able to discover the real JID of other participants) is a technical requirement to discover the key material. Members only is a sort of arbitrary requirement imposed by Conversations. (see 'OMEMO is grayed out')
OTR was removed because it was highly unreliable. It didn’t work with multiple devices and was never really specified to work with XMPP. The codebase was a mess (There was an HTML parser in there for crying out loud to deal with the garbage some OTR clients would send.) Verification was implemented in a non-blocking way. It would tell you if the current session was using an unknown fingerprint but it didn’t actively stopped you from sending messages until you have confirmed the new fingerprint. (Like Conversations would do now with BTBV after verification or when BTBV is turned off.) Considering the previous points there was little to no desire from my point to fix this potential security issue or clean up the code base. Another reason for the removal was that people would use it *accidentally* even to communicate between two Conversations clients because they read somewhere that OTR is good.
For your desktop computer we recommend that you use [Gajim](https://gajim.org). You need to install the plugins `OMEMO`, `HTTP Upload` and `URL image preview` to get the best compatibility with Conversations. Plugins can be installed from within the app.
Unfortunately we don‘t have a recommendation for iPhones right now. There are two clients available [ChatSecure](https://chatsecure.org/) and [Monal](https://monal.im/). Both with their own pros and cons.
